When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Well it didn't take nearly as long as I thought it was going to be!!
IPMA started at 12:31p and finished at 1:15p
PSCM started at 1:17p finished at 1:20p
Fingers crossed , I'm about to go drive it to see it in action
Do you see lane change assist and predictive speed toggle switches in your driver assist menu? Remember that lane change assist works when you tap the turn signal and not when you engage it fully.
Do you see lane change assist and predictive speed toggle switches in your driver assist menu? Remember that lane change assist works when you tap the turn signal and not when you engage it fully.
No I don't(yet, do I possibly need to master reboot the APIM?) it definitely is a LOT more "aggressive", in regards to the lane centering portion but it is basically functioning same as before.
No I don't(yet, do I possibly need to master reboot the APIM?) it definitely is a LOT more "aggressive", in regards to the lane centering portion but it is basically functioning same as before.
Hmmm. You can try, but I doubt resetting the APIM will add the toggle switches. I think an APIM update would need to be sent from Ford to add the features to the APIM as the final piece to the puzzle.
Hmmm. You can try, but I doubt resetting the APIM will add the toggle switches. I think an APIM update would need to be sent from Ford to add the features to the APIM as the final piece to the puzzle.
Yeah it appears that way. No dice unfortunately.
Likely needs a few configuration changes , not necessarily a whole new software revision
It DID add distance indication(and the toggle) which I don't remember being there before the update however
Post or send me your VIN so I can take a look and confirm what I think I already know. Do you still have warranty?
Edit: Never mind....just saw in your edited post that you don't.
Your only hope is to open a case with Ford customer service if you are out of warranty. Has a dealer ever tried to repair your update issue? Any work done to the APIM?
I've never attempted to inquire with the dealer but is that the only option/resolution I have is to seek Customer Service for assistance?
I've never attempted to inquire with the dealer but is that the only option/resolution I have is to seek Customer Service for assistance?
The only other option is to buy an APIM properly configured to your truck and swap it out yourself. The cost of the APIM is $500. I do not sell them, but if you are interested I would put you in direct contact with the person who does.
