Originally Posted by egap69

I took my truck into dealer for the BC activation and they made it past the IPMA update and are now stuck on an APIM update. When the truck asks to be restarted, we shut it off, wait 10 min for all lights to go out, turn it back on and the same screen comes up asking to restart vehicle. Previous APIM updates have been successful. Any ideas what the problem could be? VIN 1FTFW1ED3MFA93822

Originally Posted by egap69

I took my truck into dealer for the BC activation and they made it past the IPMA update and are now stuck on an APIM update. When the truck asks to be restarted, we shut it off, wait 10 min for all lights to go out, turn it back on and the same screen comes up asking to restart vehicle. Previous APIM updates have been successful. Any ideas what the problem could be? VIN 1FTFW1ED3MFA93822

Originally Posted by imnuts;[url=tel:7215292

7215292[/url]]My advice, make sure they have the truck on the battery charger/power supply. Others that had similar issues like that had low battery voltage if I remember correctly. Is also suggest waiting longer than just 10 min, go like 20-30 min with the key far away.

Originally Posted by egap69

Truck is connected to power supply and we have waited 30 min with key far away. Still same issue, tried at least 5 times so far.

Originally Posted by TomCinMI

Would someone please run my VIN for SW updates available through FDRS, and to show whether there is an OTA update pending? I made two dealer visits in late April/early May, reportedly resulting in several module updates and both the APIM and TCU being "unlocked up", then OTA's resumed after several months, inc. 2.7.4 and 2.8.1. Been sitting at 2.8.1 for three full business days and am wondering whether there's been an OTA failure. Built in Dearborn on 2/25/2021. Thanks in advance.

1FTFW1E81MFB04500

Originally Posted by vulnox

Has it been a known issue that when you get 2.6 you lose the ability to see your Intelligent Cruise under Driver Assistance? I have Cruise and Adaptive cruise, and neither are shown as selected. I expected to maybe see Adaptive Cruise selected and another option for Speed Limit Read/Adjust, but that's just gone completely.

All of those things still work, my adaptive cruise and auto speed limit adjust, but it isn't present in any form under Driver Assistance now. I am afraid to hit the "Adaptive Cruise" option in case it sets it then I lose auto speed limit read completely.

I have seen other variations of the Driver Assist screen people have posted, where the speed reading was in a different spot. i have checked all over and it's just, gone, but for now is at least still working. I know it was there as of a week ago up to when I got 2.6 yesterday at least.

Originally Posted by RickBullotta

For anyone who has been through all their module updates, a tip: double check your rain sensing and "courtesy wipe" (I chuckle every time I read that) wiper settings. Mine was reset to "off" in the process.