Software Updates
REALLY pisses me off. This thing was spot-effing-on keeping it in the middle of the lane until this last visit to the dealership.
Go through your menu settings and make sure everything is still set the same as before the APIM replacement. When I was performing updates in FDRS, I had to re-enable a few things after the one update.
Just to be more clear on what I see, I activate the Adaptive Cruise Control radio button and go into the menu to activate SSR and lane keeping. SSR slider is showing on, but I have to turn it off then back on to get it to work. Then, if I turn the truck off and back on, the Advanced Cruise selector button is off again and I have to go through that whole process again to get it to turn back on. This is on EVERY start cycle. For some reason it is not saving my user selections. And in most cases I forget to do this process when I start the truck, so now I am driving trying to fiddle with getting cruise control turned back on. It's a real PITA...
Just to be more clear on what I see, I activate the Adaptive Cruise Control radio button and go into the menu to activate SSR and lane keeping. SSR slider is showing on, but I have to turn it off then back on to get it to work. Then, if I turn the truck off and back on, the Advanced Cruise selector button is off again and I have to go through that whole process again to get it to turn back on. This is on EVERY start cycle. For some reason it is not saving my user selections. And in most cases I forget to do this process when I start the truck, so now I am driving trying to fiddle with getting cruise control turned back on. It's a real PITA...
If they get it fixed, let me know what they do so I can ask for the same thing…!!! I’ll have to continue to try to figure out the ACC/SSR settings not being saved…. Thanks for checking.
Man just picked up my new to me 2021 XLT and says up to date. But yet I'm still on21146 revision 145. My vin is 1FTFW1E88MFA54016
Based on my conversation with the ASM this morning, it sure sounded like the original tech who did the work didn't know what he was doing.
Here's to hoping it gets taken care of. I would like for all this to be working properly for when my OTA update that includes BlueCruise finally makes its way to me.
Called me earlier to tell me the IPMA module was failing calibration. Said they ordered a new one that should be there tomorrow.
Based on my conversation with the ASM this morning, it sure sounded like the original tech who did the work didn't know what he was doing.
Here's to hoping it gets taken care of. I would like for all this to be working properly for when my OTA update that includes BlueCruise finally makes its way to me.
Based on my conversation with the ASM this morning, it sure sounded like the original tech who did the work didn't know what he was doing.
Here's to hoping it gets taken care of. I would like for all this to be working properly for when my OTA update that includes BlueCruise finally makes its way to me.






