When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I have not received an update since May, Seemed like I was getting them twice a month for a while. Last one was 24-PU021-Ftdi-FX, am I up to date? Could someone please check mine?
Any chance you could check 1FTEW1EP3MFA97116 when you get a chance? I know mine is a March 21' build, so I think that is still job 1?
Thanks in advance
Yes, any 2021 built on or before June of 2021 is job 1. Your truck is on Sync 23159 which is one version behind the latest. OTA history shows no recent update history, but the modem is working and the truck is talking to the cloud fine. Nothing to do but wait for the next one to come in.
Originally Posted by jijones
I have not received an update since May, Seemed like I was getting them twice a month for a while. Last one was 24-PU021-Ftdi-FX, am I up to date? Could someone please check mine?
Your truck is on the latest Sync software, but does show many of the other modules have pending updates. Everything looks fine; just gotta continue to wait for more to come in.
Originally Posted by time_to_relax
Anyone have the 411 on this update?
That's the CMR update that replaced 6.13.0 that was causing BC not to work.
Can someone please look up my brother's VIN for any pending updates, 2023 F150. He is having a lot of CarPlay issues along with the center screen blacking out and resetting it self. He also says the reverse cameras sometime show a blank screen. I am sure there is more I am forgetting. Looks like he is on the current Sync software version though. Thanks in advance!
Last edited by xtremevol; Sep 22, 2024 at 10:07 AM.
Can someone please look up my brother's VIN for any pending updates, 2023 F150. He is having a lot of CarPlay issues along with the center screen blacking out and resetting it self. He also says the reverse cameras sometime show a blank screen. I am sure there is more I am forgetting. Looks like he is on the current Sync software version though. Thanks in advance!
There are no more APIM updates available for this truck that would address the issues described. It is also not reporting any codes in regards tot he APIM/touchscreen. The only codes being reported are below. Not sure if that IPMA code is related to the camera issue, but I don't see anything useful with what I am able to see. Dealer would have to plug into the truck and run some pin-point tests with FDRS to see what's going on.
There are no more APIM updates available for this truck that would address the issues described. It is also not reporting any codes in regards tot he APIM/touchscreen. The only codes being reported are below. Not sure if that IPMA code is related to the camera issue, but I don't see anything useful with what I am able to see. Dealer would have to plug into the truck and run some pin-point tests with FDRS to see what's going on.
ok thanks! I am sure he wont like that answer about no updates haha! I may have him hook up to my mongoose this weekend anyways and see if there is any other modules that need updating.
ok thanks! I am sure he wont like that answer about no updates haha! I may have him hook up to my mongoose this weekend anyways and see if there is any other modules that need updating.
Oh, there's plenty to update, just nothing to address the issues of concern:
Received my first ever battery low charge notice in FordPass indicating the truck was in Battery Save Mode and I should take it for a drive.
It's been sitting since my arm surgery on Tue 13 Aug - so, 2 weeks. Never received that notice during international travel for a month in Feb, 3 weeks in Apr, and 2 weeks in Jul. Could there have been an attempted OTA update in the past 2 weeks?
Put my battery charger on it today after a short drive (negative clip not on the neg terminal, near the BMS sensor). It showed current charge as 11.9V, but after a bit it was up to 12.3V, then eventually 12.9V. However, it dropped back down to 12.6V, then 12.2V. I had to disconnect it when it was back up to 12.9V and the charger was quite hot. I also noticed a spark when I initially connected the neg clip after I connected the pos clip, but before plugging in the charger.
I currently have an issue with the bed camera sometimes not working. I noticed today the AutoHold wasn't working.
Any insights?
Last edited by Ralphllankford; Sep 21, 2024 at 11:01 PM.