When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I got the notification last night that 4.3.4 would be installed. Checked this AM and it says it was completed. I was one of the Job 1 trucks that skipped rear cameras in motion awhile back. Here’s what my screen says:
I got the notification last night that 4.3.4 would be installed. Checked this AM and it says it was completed. I was one of the Job 1 trucks that skipped rear cameras in motion awhile back. Here’s what my screen says:
Yes, I am happy to see Ford is not leaving the people that got skipped over updates hanging out to dry. It seems like they had a plan from the minute they started skipping over updates. Good news indeed.
Yes, I am happy to see Ford is not leaving the people that got skipped over updates hanging out to dry. It seems like they had a plan from the minute they started skipping over updates. Good news indeed.
@rugedraw do you think that for those of us who got cams in motion back in the much earlier OTAs (2.x or 3.x, don't remember which it was) that we may not be getting these 4.3.X updates? If that is all that is being updated, it would not be the end of the world... But at the same time, I would think they want to somehow standardize on the OTAs needed for all of the trucks. I am still hovering on the 4.2.4 update as my last one back in early May.
@rugedraw do you think that for those of us who got cams in motion back in the much earlier OTAs (2.x or 3.x, don't remember which it was) that we may not be getting these 4.3.X updates? If that is all that is being updated, it would not be the end of the world... But at the same time, I would think they want to somehow standardize on the OTAs needed for all of the trucks. I am still hovering on the 4.2.4 update as my last one back in early May.
I got that stuff earlier and got 4.3.5 a week or more ago.
@rugedraw do you think that for those of us who got cams in motion back in the much earlier OTAs (2.x or 3.x, don't remember which it was) that we may not be getting these 4.3.X updates? If that is all that is being updated, it would not be the end of the world... But at the same time, I would think they want to somehow standardize on the OTAs needed for all of the trucks. I am still hovering on the 4.2.4 update as my last one back in early May.
Keep in mind the 4.3.x updates are only for 2021 trucks. Yes, you will eventually get those updates sent to you. 4.3.2 was sent to me 4 times and it failed every time. After speaking to Jesse, he said I most likely have a faulty connection on the ethernet port of my IPC. It would explain why I could not get passed 2.7.4 which was an IPC update, and I cannot get passed 4.3.2 which also updates the IPC. I (and probably others in my situation) will only get 4.3.2 and 4.3.3 with FDRS. In theory, I should still be able to get 4.3.5, but if 4.3.4 gets sent to me, it would fail since I already got the equivalent of the 2.8.1-2.8.3 updates back when I manually updated my truck the first time.
Last edited by rugedraw; Aug 16, 2023 at 01:51 PM.
Hello, I have version 22087 (2.6.0) and after this update I started having problems with the screen. No more updates come, I already tried everything I could find online
What do you advise to do?
@rugedraw Would you mind taking a look at ours - 1FTFW1E83MFB7101?
Two nights ago, we had updates go through. To my knowledge, we were sitting at 4.3.3 before. While running errands yesterday afternoon, it began to flash the hazards after we parked it and shut it off and then after our next stop the alarm began to go off after it was parked and shut off. Hasn't happened since, but we weren't sure if it was because of the updates that went through.
@rugedraw Would you mind taking a look at ours - 1FTFW1E83MFB7101?
Two nights ago, we had updates go through. To my knowledge, we were sitting at 4.3.3 before. While running errands yesterday afternoon, it began to flash the hazards after we parked it and shut it off and then after our next stop the alarm began to go off after it was parked and shut off. Hasn't happened since, but we weren't sure if it was because of the updates that went through.
Strange. Your truck did not record any relevant DTC's that coincide with what you're saying. You did get another OTA for the PCM yesterday, but that installed around midnight. I assume you have auto-updates schedule around that time. The only DTC your truck has been consistently recording is:
HVAC
|
B1083
:
07
:
0A
Recirculation Damper Motor
Not sure what happened yesterday. A glitch in the matrix?
