When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Have you did any forscan changes? If you have, try loading the as built data for you truck through forscan. You can also try to restart your APIM by holding the power and fast forward together. That sucks man.
Restart Reboot did, it was the very first thing that came to mind! And for the forscan, I have not heard which model to buy? Is it difficult to work with him or not?
The Ford deities finally decided to send 4.3.5 my way. One thing I noticed is that of the 7 files in this update 5 of them were already at the same version, so no net change.
The ML3T-14H021 is the only component getting "upgraded" and then there's this new MU5T-14H394-AAM that's coming in.
For those that are fearful they could be missing out maybe they're not actually missing out? I realize some of the skips could be dramatic and this is entirely likely, but perhaps not all versions skipped mean the end of the world?
As one example MU5T-14H151 hasn't changed versions since the 4.2.1 update that I received in May. The other unchanged versions in 4.3.5 came in with the 4.2.3 update.
Thoughts?
I agree that there is no need to panic. These 4.x.x updates update different modules and the sequence in which they are installed should not cause any configuration issues (as far as I know) if they are installed out of sequence.
Originally Posted by dakotasrus
APIM updated successful at dealership but sync 4 still not updated. The only change is now when Truck is turned on it says “Ford Saved”- no idea what that means.
What Sync version where you on before they updated you to 21146? I see they successfully updated the APIM once and then ran an APIM config. If you were stuck on Sync 20301, you will start getting OTA's now. They will not update you all the way as that takes hours and hours and Ford does not pay them to update modules even under warranty,
Originally Posted by Vadym
This is what happened to me after the update 😭😭😭
Help guys, I don’t know what to do with this, now I don’t have time to go to the dealer, and soon there will be a long road
Vin 1FTFW1E8XMFA75062
After this announcement, I can’t use the connection to the phone because this window hangs on top that can’t be closed, can’t be moved, just in general you can’t do anything with it
To be honest, I don’t know why he is at all, he only takes up space on the screen (
Your truck is very behind on updates. It is possible that update did not properly install and there are some configuration issues, but it goes beyond my scope of knowledge on how to fix it. Try resetting your APIM. Turn the truck on, and hold the radio power button and forward seek button at the same time until the screen reboots.
My truck downloaded 22-PU1009-PPO-SI today and has been trying to install it. I connected the battery charger and kicked off the install a couple of times and it is failing. I am waiting for the battery to fully charge before trying to kick it off again. Shades of trying to get 2.8.1 to load...
My truck downloaded 4.3.5 a few days ago, skipping over a bunch of updates (jumping from 4.2.1).
My truck downloaded 22-PU1009-PPO-SI today and has been trying to install it. I connected the battery charger and kicked off the install a couple of times and it is failing. I am waiting for the battery to fully charge before trying to kick it off again. Shades of trying to get 2.8.1 to load...
My truck downloaded 4.3.5 a few days ago, skipping over a bunch of updates (jumping from 4.2.1).
Installed it today it was a quick update with 10 minutes downtime.
I agree that there is no need to panic. These 4.x.x updates update different modules and the sequence in which they are installed should not cause any configuration issues (as far as I know) if they are installed out of sequence.
What Sync version where you on before they updated you to 21146? I see they successfully updated the APIM once and then ran an APIM config. If you were stuck on Sync 20301, you will start getting OTA's now. They will not update you all the way as that takes hours and hours and Ford does not pay them to update modules even under warranty,
Your truck is very behind on updates. It is possible that update did not properly install and there are some configuration issues, but it goes beyond my scope of knowledge on how to fix it. Try resetting your APIM. Turn the truck on, and hold the radio power button and forward seek button at the same time until the screen reboots.
I have already run it many times, there is no benefit from it
Dealer has had my truck since May 25th trying to replace the APIM and get OTA updates working. No success at all. Now waiting for another APIM that is said to be on national backorder.
The service advisor called and asked if I wanted to get my truck back until the part comes in. I told her "Let's give it another week". Sure enough, the power went out at home last night and I had to borrow a generator from my neighbor because my PB with 7.2kw was unavailable. I'll be picking it up this week.
I had asked the service writer since they had my truck and could not do anything, to at least get that transmission update done per the TSB,. She agreed to do that.
Can someone check to see if that has been done before I pick it up?
