Software Updates
Senior Member
Joined: Jun 2010
Posts: 1,070
Likes: 171
From: North East Texas
could you check mine?
i checked yesterday and it said it was up to date but reading above i did not get any june updates yet?
my truck was a late 21 build , 1FTFW1E88NFA11975
thanks
i checked yesterday and it said it was up to date but reading above i did not get any june updates yet?
my truck was a late 21 build , 1FTFW1E88NFA11975
thanks
could you check mine?
i checked yesterday and it said it was up to date but reading above i did not get any june updates yet?
my truck was a late 21 build , 1FTFW1E88NFA11975
thanks
i checked yesterday and it said it was up to date but reading above i did not get any june updates yet?
my truck was a late 21 build , 1FTFW1E88NFA11975
thanks
Member
Joined: Oct 2016
Posts: 75
Likes: 19
From: Calgary
Senior Member
Joined: Aug 2013
Posts: 822
Likes: 337
From: Severn, MD
Senior Member
Joined: Jan 2021
Posts: 132
Likes: 65
FYI,
I think I found a consistent solution to this type of problem which seems to be more common lately. My theory is the GWM fails to establish a handshake with certain modules over the in-vehicle Ethernet after certain events. This fix will work on vehicles without the need to disconnect the battery or restore any as built parameters to default.
I have done this on three F150s including my own which has resolved random ethernet disconnected DTCs and / or no OTA data being reported through to PTS.
This might be a solution OR I just got randomly lucky with three trucks in a row.
Step 1 - This force reboots key problematic modules.
ForScan > Wrench tab >
reset TCU module (follow on screen guided steps)
reset APIM module (follow on screen guided steps)
reset GWM module (follow on screen guided steps)
Step 2
In Sync 4
Settings > General > Reset > Master Reset
(Yes, I understand a Sync Master Reset sucks)
Step 3
ForScan > Wrench tab >
reset TCU module (follow on screen guided steps)
reset APIM module (follow on screen guided steps)
reset GWM module (follow on screen guided steps)
Step 4
Re-authenticate Ford Pass and enable diagnostics sharing in the privacy settings.
Step 5
Perform a full vehicle shut down. Ignition off, step out side, close all doors, lock from outside with the fob, wait several minutes for everything to go to sleep.
Feel free to use the vehicle normally after leaving it off for a few minutes.
Step 6
Within 48 hours the next OTA will appear.
I think I found a consistent solution to this type of problem which seems to be more common lately. My theory is the GWM fails to establish a handshake with certain modules over the in-vehicle Ethernet after certain events. This fix will work on vehicles without the need to disconnect the battery or restore any as built parameters to default.
I have done this on three F150s including my own which has resolved random ethernet disconnected DTCs and / or no OTA data being reported through to PTS.
This might be a solution OR I just got randomly lucky with three trucks in a row.
Step 1 - This force reboots key problematic modules.
ForScan > Wrench tab >
reset TCU module (follow on screen guided steps)
reset APIM module (follow on screen guided steps)
reset GWM module (follow on screen guided steps)
Step 2
In Sync 4
Settings > General > Reset > Master Reset
(Yes, I understand a Sync Master Reset sucks)
Step 3
ForScan > Wrench tab >
reset TCU module (follow on screen guided steps)
reset APIM module (follow on screen guided steps)
reset GWM module (follow on screen guided steps)
Step 4
Re-authenticate Ford Pass and enable diagnostics sharing in the privacy settings.
Step 5
Perform a full vehicle shut down. Ignition off, step out side, close all doors, lock from outside with the fob, wait several minutes for everything to go to sleep.
Feel free to use the vehicle normally after leaving it off for a few minutes.
Step 6
Within 48 hours the next OTA will appear.
Senior Member
Joined: Sep 2021
Posts: 656
Likes: 268
From: N. Texas
Sync version is 22095.421. The message at the bottom of that screen says Hands Free Driving Mode available through 10-09-2022 and not the 1 year free as outlined, but those may be 2 totally different things. I did get the FordPass notification of Blue Cruise activation for a year…
So all is good for the time being. Hopefully more people can get squared away and up to par on the purchased capabilities soon.
Thanks to all who helped me try to figure things out during these past few months. It is really appreciated.
Good luck all!
Senior Member
Joined: Feb 2012
Posts: 3,770
Likes: 2,178
From: SE Michigan
IPC replacement was successful. New module updated on first try. 2 other FDRS updates also applied, so hopefully I am fully up to date. BC worked well. It seems to have better lane centering than before. I also have cameras at speed.
Sync version is 22095.421. The message at the bottom of that screen says Hands Free Driving Mode available through 10-09-2022 and not the 1 year free as outlined, but those may be 2 totally different things. I did get the FordPass notification of Blue Cruise activation for a year…
So all is good for the time being. Hopefully more people can get squared away and up to par on the purchased capabilities soon.
Thanks to all who helped me try to figure things out during these past few months. It is really appreciated.
Good luck all!
Sync version is 22095.421. The message at the bottom of that screen says Hands Free Driving Mode available through 10-09-2022 and not the 1 year free as outlined, but those may be 2 totally different things. I did get the FordPass notification of Blue Cruise activation for a year…
So all is good for the time being. Hopefully more people can get squared away and up to par on the purchased capabilities soon.
Thanks to all who helped me try to figure things out during these past few months. It is really appreciated.
Good luck all!
