Ford F150 Forum - Community of Ford Truck Fans - View Profile: Livnitup

Topic Sponsor

Livnitup Livnitup is offline

The FORScan Guy

Visitor Messages

Showing Visitor Messages 1 to 10 of 60
  1. F150 Newbie 82
    12-20-2018 03:25 AM - permalink
    Hi living it up I just had a quick question I seen on YouTube guy was being able to use navigation while driving and I cannot find this in any of the spreadsheets and he said he found it on for scan just curious if you could help thanks
  2. Mallardmarshal
    11-19-2018 07:57 PM - permalink
  3. homeboarder8
    11-05-2018 04:43 PM - permalink
    Also I did see on another forum that you were selling programmed 8" clusters, is this still available?
  4. homeboarder8
    11-05-2018 04:35 PM - permalink
    I have a 2015 XLT with a Canadian cluster so every time the vehicle starts the digital speedometer defaults to KMH. After researching this issue it sounds like you might be able to help. Is it possible to change the default to MPH with my existing cluster, or does it require a replacement? I noticed others have purchased a cluster off of Ebay, however it sounds like that would require an odometer correction. Is this something you can help with? If so, would you mind detailing what my options are and quote some prices? Thank you!
  5. cdwalker25u
    10-31-2018 04:15 PM - permalink
    Is there anything in FORScan to Enabled entering NAV Destination while vehicle is in motion for a 2015 F150 Lariat Sync 2?
  6. acmtn
    10-29-2018 08:08 AM - permalink
    Undesirable news, but thanks for getting back with me.
  7. acmtn
    10-28-2018 07:41 AM - permalink
    Thanks for your spreadsheet. I have 2018 Raptor, and one of my big annoyances is the deliberate blocking of seat memory recall while moving - I don't understand that corporate decision, but that's another discussion. Looking through the spreadsheet, I couldn't find any entries to disable that 'feature'. Any suggestions or thoughts? In partner with that question - on the spreadsheet, there are notes that show discovered by such and such - are these discovered by trial and error, or is there some logical method? I ask just in case I have to try to discover the resolution to my desired mod. Apologies in advance if these questions have been answered somewhere else.
  8. JackZX
    09-14-2018 02:46 PM - permalink
    Hey Livnitup,
    I ran across your post date 8-31-2018 where you talked about and link to a Common spreadsheet on codes for the various modules. I looked at it and on your first tab, Common, you state on line 26 Adding Nav to 2015 w/Sync2 to see a tab labeled with "Add NAV to 2015s". But I don't see a Tab with that label? Could I get a copy of that spreadsheet? I've tried to add Nav and haven't been successful thus far so hope I can gain further insight from this spreadsheet.
  9. textony
    08-21-2018 11:49 AM - permalink
    Hey Livnitup, I have a question for you as per Sync3 and forscan. I have a 2015 lariat ultimate and installed a Sync 3 unit in it. I enabled the AC/Heated Seat controls just fine via forscan. The issue I'm seeing is the Sync 3 Climate controls just don't respond. Literally nothing on that screen seems to work.(seat controls either) I touch a button, it beeps like normal but nothing happens. No temp is displayed either. The manual controls work just fine. On the home page, the seat buttons are grayed out. Is there some sort of update I need to perform?
    Any ideas what may cause this. I've been searching the interwebs and haven't found anyone with this issue so far.
    I have dual climate zones as well.

    Thanks for any input you can give.
  10. waf
    08-20-2018 05:15 PM - permalink
    Hey Livinitup, I stumbled accross a post of yours after researching an issue I have with my brake controller on my 2015 F150. Below is a link to a post I started along with a link to the thread I found a quote by you indicating you know how to possibly fix my issue. Essentially I want the Brake Effort setting on my 2015 F150. Can you point me in the right direction?

    your quote

    I just updated the software I use for firmware writing and it said there is a 2016 IPC update available for my truck. So I was just able to grab all the 2016 firmware files!!! So with these files I can take a 2015 cluster to 2016 firmware and it will work for Pro Trailer Backup Assist and it will add the Brake Effort (low/med/high) under Towing screen.

    My thread

About Me


Total Posts
Visitor Messages
Total Thanks
General Information
  • Last Activity: Today 03:13 PM
  • Join Date: 12-31-2015


Showing Friends 1 to 10 of 31

Contact Us Advertising Cookie Policy Privacy Statement Terms of Service

© 2018 MH Sub I, LLC dba Internet Brands

We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to and affiliated sites.