Not sure if the ratcheting type will work. Blades are very sharp and hold their edge for quite awhile on the type white posted. You could try if you have hose to experiment with.

 

Good job on the fence white.

 

Man... coulda sworn when I went behind the counter at Advance two weekends ago, there were some Goodyear's hanging up there. Could be my imagination though.

I lucked out, big time! The return hose on both pumps are 10mm, and the high pressure is the same thread. I think I'm going to try and raise it up an inch though. It looks like it'll fit fine.

 

Maybe they were keeping the name on some stuff. Ohio posted the link,maybe a few months back. Read it but it didn't stick very well....in case you hadn't noticed.

So you're fitting a electric pump over hydraulic...must of got lost somewhere lol.

 

It's still hydraulic, just not belt driven. They can't be heard over the engine.... which is very appealing to me, lol. I hate the 80's Ford PS pump noise. The one in Frankie has made noise since day one, and now it's also leaking. So, I say **** off O'Reilly! LOL

 

Most of the fence around my yard belongs to me. However, there is about 50 feet of fence that belongs to my neighbor. Two of his posts broke while he was out of town a couple years ago. I ran over to HD and got some of the Simpson Fence Mender's and pounded those in, and they've been solid! I don't even remember if I told him that I did that, LOL. Hell, he's probably seen them by now. He comes over and rummages through my bolts once and a while.

 

...

 

...

 

Is it one that only squeaks at startup, then goes quiet after it gets moving?

 

...