yea i have a small oil slick in the garage from my siphon pump blowing apart on me changing oil in the pressure washer...didn't see the kink in the discharge line. ruined a brand new pair of shorts too

 

You might still have time to remove it. Get what you can with pressure washer, saturate the spot with Simple Green once more, then try it again. Oils are difficult to impossible to remove once they set in there. The larger pressure washer will take the majority of old oil stains out . Have to be careful with it though on the stubborn spots, it will also take the concrete down to the stones in the mix......leaving a polished stone appearance in that spot instead. Not good lol.

 

i should, and of course the side of the garage that happened is the non sealed side...where the F150 is parked that is sealed

 

COS, wasn't that mixture you posted for your Pine-Sol recipe.... not Simple Green?

 

No, Pine-Sol gets diluted like a few oz. (glug glug) to 2 or 3G in a bucket and you apply with a medium-stiff scrub brush.

 

OK, my bad. Sorry.

Who was it ( @GRF150 ?) that posted the ridiculously priced friction modifier? Try this:



I still think it was only 7 or 8 dollars a bottle last time I got it at LHM Ford.

 

$7.69 per bottle. Speaking of that stuff, got some in on a stock order a few weeks ago, leaked all over the box with our other parts..needless to say, my sinuses were wide open after that

 

LOL... we were working on the same thing.

 

From the inside or the outside?

 

outside, haha. oil blasted all over them