Topic Sponsor
2015 - 2020 Ford F150 General discussion on the 13th generation Ford F150 truck.
Sponsored by:
Sponsored by: Worksport

Adding Front Camera to XLT

Thread Tools
 
Search this Thread
 
Old Mar 22, 2017 | 02:36 PM
  #521  
jdroller's Avatar
Senior Member
 
Joined: Sep 2016
Posts: 306
Likes: 140
From: Amarillo, Tx
Default Front Activation Button

Originally Posted by Lurch96
- jdroller, do you have a picture of your front camera trigger button mounted near the push to start switch?
Here are a few pics of the front activation button on my Rostra install. Sorry for the delay.





Reply
Old Mar 22, 2017 | 02:38 PM
  #522  
jdroller's Avatar
Senior Member
 
Joined: Sep 2016
Posts: 306
Likes: 140
From: Amarillo, Tx
Default Speed Lock Code

Originally Posted by HuskerHarley
@ Lurch96

I can't get this unlock code to work on my 2017. Please see if you or anyone can do this on your Sync3 screen:

From the main menu press "System Info"

On the system info page press where it says "Copyright"

Then a keypad will come up, enter "9999" this will disable the speed block or enable it if it is off.
I assume you are doing this on the Rostra screen and not just the standard Sync 3 General Information screen?
Reply
Old Mar 22, 2017 | 02:43 PM
  #523  
Husker's Avatar
Just The Basic Facts
5 Year Member
Photogenic
Liked
Loved
iTrader: (4)
 
Joined: Aug 2016
Posts: 2,831
Likes: 1,027
From: Nebraska
Default

Originally Posted by jdroller
I assume you are doing this on the Rostra screen and not just the standard Sync 3 General Information screen?
No the Sync3 screen.

CS just let me know that a Video How to is gonna be sent L8TR today. So please check to see if you can do the On/Off as described in my request post, if yer truck is not a 2017.

I'll report soon as I get the info from CS.
Reply
Old Mar 22, 2017 | 02:44 PM
  #524  
Husker's Avatar
Just The Basic Facts
5 Year Member
Photogenic
Liked
Loved
iTrader: (4)
 
Joined: Aug 2016
Posts: 2,831
Likes: 1,027
From: Nebraska
Default

Originally Posted by jdroller
Here are a few pics of the front activation button on my Rostra install. Sorry for the delay.

Nice job-->
Reply
Old Mar 22, 2017 | 10:11 PM
  #525  
Lurch96's Avatar
5 Year Member
5 Year Member
Liked
Loved
 
Joined: Sep 2016
Posts: 130
Likes: 18
Default

HuskerHarley,

I also couldn't get any keypad to pop up on the System Info screen. I tried tapping everywhere but no luck. Hey by the way when are you going to give us that good news you were talking about?


jdroller,

Thanks for the pics, looks like a good spot for the trigger switch!
Reply
Old Mar 22, 2017 | 11:02 PM
  #526  
jdroller's Avatar
Senior Member
 
Joined: Sep 2016
Posts: 306
Likes: 140
From: Amarillo, Tx
Default

Originally Posted by Lurch96
HuskerHarley,

I also couldn't get any keypad to pop up on the System Info screen. I tried tapping everywhere but no luck. Hey by the way when are you going to give us that good news you were talking about?
On my 2016 Sync 3, I do not have a System Info screen. Looked everywhere.
Reply
Old Mar 22, 2017 | 11:21 PM
  #527  
camera-source.com's Avatar
F150 Vendor
10 Year Member
Liked
 
Joined: Jun 2012
Posts: 308
Likes: 87
Default

Sorry for the delay here is the solution to be able to watch HDMI input in motion. We have let Rostra know about the menu popping up at random times and they are looking into this as well. Thanks for bringing all this to our attention we push it to Rostra immediately so they can get their engineers on the fix.


Still no fix for Sync 3 v2.2 compatibility but I know they are working on it. Thanks to those who are patiently waiting for the resolution and know that we are bugging Rostra for the firmware on a daily basis. As soon as we have it I will post a message here but as always our customers are always welcome to give us a call for a status update.

Regards,
Chris
camera-source.com
888-844-9763
Reply
Old Mar 23, 2017 | 10:31 AM
  #528  
Lurch96's Avatar
5 Year Member
5 Year Member
Liked
Loved
 
Joined: Sep 2016
Posts: 130
Likes: 18
Default

I tried a press and hold yesterday but turns out it's a press and hooooooold. I was able to enter the code this morning but haven't tested it yet. Thanks again camera-source!
Reply
Old Mar 23, 2017 | 10:32 AM
  #529  
Husker's Avatar
Just The Basic Facts
5 Year Member
Photogenic
Liked
Loved
iTrader: (4)
 
Joined: Aug 2016
Posts: 2,831
Likes: 1,027
From: Nebraska
Default

Originally Posted by camera-source.com
Sorry for the delay here is the solution to be able to watch HDMI input in motion. We have let Rostra know about the menu popping up at random times and they are looking into this as well. Thanks for bringing all this to our attention we push it to Rostra immediately so they can get their engineers on the fix.

https://youtu.be/oHR1b_NjBnw

Still no fix for Sync 3 v2.2 compatibility but I know they are working on it. Thanks to those who are patiently waiting for the resolution and know that we are bugging Rostra for the firmware on a daily basis. As soon as we have it I will post a message here but as always our customers are always welcome to give us a call for a status update.

Regards,
Chris
camera-source.com
888-844-9763
Thanks, Chris. I just did the screen trick. I'll be testing it in a few to see if I can use Google Maps via HDMI while driving.

Cameras on the mirrors work great. Yesterday the screen Pop-Up did NOT happen??... I'm going for a test drive and will report back.
Reply
Old Mar 23, 2017 | 10:34 AM
  #530  
Husker's Avatar
Just The Basic Facts
5 Year Member
Photogenic
Liked
Loved
iTrader: (4)
 
Joined: Aug 2016
Posts: 2,831
Likes: 1,027
From: Nebraska
Default

Originally Posted by Lurch96
I tried a press and hold yesterday but turns out it's a press and hooooooold. I was able to enter the code this morning but haven't tested it yet. Thanks again camera-source!
LOL!!!I did the same yesterday as well-->Hooold not HOOOOOOOOLD!
Reply



All times are GMT -4. The time now is 11:15 AM.