A few months back, I had an update that wouldn't complete (and was told I didn't want it to since I have a tune), but that one doesn't ever seem to have been resent since I haven't had issues, but I noticed when I go in to look at recent updates, that it did have a completed update in there. I never got a screen or a Fordpass message about getting an update, so now I'm wondering If I've been getting updates this whole time and just didn't know. Is that something someone could tell me?

 

Please remove your VIN from the thread.

OTA history only goes back 60 days. It shows OTA ECG-24.2.5.6.1 went through successfully on 9/26 and nothing has been sent you you since then.

 

I just saw your email. Ford shows the same Sync version server side as what is on your APIM and the serial numbers match, too. Modules pending updates are below and you do show a GWM pending, so that is a very good sign that everything is good to go as far as your APIM swap. I do not have the knowledge or tools to confirm that 100%, but if I had to guess, I'd say you're OK there.

Your modem does show it is offline completely, so I cannot pull any codes on your truck to see if there is anything there. When you can, pull the codes off of your truck with FORScan and post them.

 

Perfect, sounds like everything’s looking good so far.
What module would I pull the codes for, would it be the APIM?

 

All codes.

 

I can't remember if I ever got back with you on this issue. Are you still able to look into it?

 

Good morning @rugedraw . Although I'm up on your list for the Mongoose, I was holding off as I deal with laptop issues. In the meantime, I received the recall notice about the PCM reprogramming and possible catalytic converter replacement. Local dealer just picked up my truck to perform that service.

Will send my VIN by PM. Can I get a list of all the modules showing available updates and whether I'm throwing any codes?

SInce the bed camera replacement, I seem to get sporadic random warning bells when I put the truck in reverse, but nothing shows. Same thing sometimes when I'm just driving down the road as if my Android Auto is notifying me of a text or whatever, but there's nothing.

 

Just saw your message and sent you the list of pending updates there. Your truck is reporting several IPMA codes and I'm sure this has something to do with your issue. There are several TSB's and SSM's referenced by the codes, so it should not be difficult for them to figure out what's going on and fix it.

 

I'm finally getting mine taken care of when I go in for the PCM reprogram. It's crazy sporadic and I hope the tech will pull the VHA to show the codes because it is far more annoying than anything serious.

 

Wow - thanks again!
The list of module updates is a bit concerning.

I see the DCDC - I used the 7.2kwH ProPower during the Hurricane Milton power outage and it seemed to work fine. Although I have received an occasional notification about the ProPower when nothing is plugged in.

I thought I read somewhere that the BCM and BCMC shouldn't be updated by the owner?

During the bed camera replacement in Sep, my ticket said they updated the ACM, GWM, APIM, DDM, PDM, DSM, and TRM modules and cleared the DTCs.

Should I share the above list of IPMA codes with the service advisor?