2018: Adding Adaptive Cruise Control
Member
Joined: Feb 2019
Posts: 65
Likes: 24
What exactly do you mean by stop and go? I was wanting to order the parts to have on hand in the event this is possible but at the same time do not want to put all my effort into it and it not work. Hopefully soon with everyone's help and forscan developers this will become possible. Livnitup was a great help on adding BLISS to my Super Duty hopefully he can work his magic on this project for all of us as well.
Senior Member
Joined: Apr 2016
Posts: 338
Likes: 64
From: Kansas City
What exactly do you mean by stop and go? I was wanting to order the parts to have on hand in the event this is possible but at the same time do not want to put all my effort into it and it not work. Hopefully soon with everyone's help and forscan developers this will become possible. Livnitup was a great help on adding BLISS to my Super Duty hopefully he can work his magic on this project for all of us as well.
18 and 19 ACC work that it come to a complete stop in traffic and will Resume when the car in front of you starts moving again keeping a safe distance . The 15 to 17 ACC will apply the brake down to 12 mph, give you a chime and disengage but you cannot re-engage until you’re over 20 miles an hour with Resume button on your steering wheel .
Senior Member
Joined: Apr 2016
Posts: 338
Likes: 64
From: Kansas City
The module mounts under the long black plastic piece on the far left side of the bumper. There are mounting holes for the bracket there to hold the CADS module.
Yes...There is another thread on a different forum for pre-2018 models that might answer a lot of your questions.
https://www.ford-trucks.com/forums/1...-complete.html
There is a similar thread here too. I just can't find it at the moment.
To my knowledge though nobody has been successful in adding it to a 2018+ truck.
Mike
https://www.ford-trucks.com/forums/1...-complete.html
There is a similar thread here too. I just can't find it at the moment.
To my knowledge though nobody has been successful in adding it to a 2018+ truck.
Mike
Last edited by OCMike; Feb 22, 2019 at 03:07 PM.
5 Year Member
Joined: Nov 2013
Posts: 315
Likes: 89
From: Western PA
I would to add ACC to my 2018 F-150 lead foot lariat special edition. I have the 502a package. I would to make sure I’m ordering all the right parts I need. This is what I see I need so far.
CCM - H1BZ-9E731-AE on back order
CCM Bracket- JL3Z-14C022-A
Wire Harness -JL3Z-15K867-J wrong one had to order -G. So if anyone ordered the front harness. You need to know the type of fog lights installed.
Bolt - 9L3Z-19S426-A. Not sure if I need one or two.
Mount bracket studs - W717467-S439 and W717468-S439. Not sure of the qty of each of them.
HUD trim - FL3Z-15043C54-BA. installed it this last weekend
HUD - FL3Z-19G468-A. Installed it this last weekend
Steering wheel sw - JL3Z-9C888-FA. Installed it this last weekend
all help is welcome please.
thanks in advance
Jeff
CCM - H1BZ-9E731-AE on back order
CCM Bracket- JL3Z-14C022-A
Wire Harness -JL3Z-15K867-J wrong one had to order -G. So if anyone ordered the front harness. You need to know the type of fog lights installed.
Bolt - 9L3Z-19S426-A. Not sure if I need one or two.
Mount bracket studs - W717467-S439 and W717468-S439. Not sure of the qty of each of them.
HUD trim - FL3Z-15043C54-BA. installed it this last weekend
HUD - FL3Z-19G468-A. Installed it this last weekend
Steering wheel sw - JL3Z-9C888-FA. Installed it this last weekend
all help is welcome please.
thanks in advance
Jeff
5 Year Member
Joined: Nov 2013
Posts: 315
Likes: 89
From: Western PA
Missing parts?
2018 F-150 Lead Foot Lariat Special Edition With 502a package. Here are the parts I’ve added so far.
CADS - H1BZ-9E731-AE
CADS Bracket- JL3Z-14C022-A
Bolts - W505424-S900 - 4ea Nutplates - W520802-S900 - 4ea
Bumper Wire Harness -JL3Z-15K867-G
Wire Harness from Bumper Harness to CADS - JL3Z-15K867-B
Mount bracket studs - W717467-S439 and W717468-S439
HUD trim - FL3Z-15043C54-BA
HUD - FL3Z-19G468-A
Steering wheel sw - JL3Z-9C888-FA
I also order and got the IPMA - H1BZ-9E731-AE.
Changes made in Forscan.
ABS - 760-03-01 7xxx xx. With this one I get one ABS dtc. But if I put it back to as built. I still get the same dtc.
SCCM - 724-03-01 19xx xxxx xx
IPC - 720-01-01 xcxx 4xxx xxxx
IPC - 720-01-01 xfxx xxxx xxxx
IPC - 720-04-01 exxx xxxx xxxx
BCM - 726-13-01 xxxc 4xxx xxxx. When I do this one normal cruise will not work. So I put it back to the as built.
Normal cruise is still working. I do get one start-up warning.
Normal cruise active adaptive braking off.
CADS - H1BZ-9E731-AE
CADS Bracket- JL3Z-14C022-A
Bolts - W505424-S900 - 4ea Nutplates - W520802-S900 - 4ea
Bumper Wire Harness -JL3Z-15K867-G
Wire Harness from Bumper Harness to CADS - JL3Z-15K867-B
Mount bracket studs - W717467-S439 and W717468-S439
HUD trim - FL3Z-15043C54-BA
HUD - FL3Z-19G468-A
Steering wheel sw - JL3Z-9C888-FA
I also order and got the IPMA - H1BZ-9E731-AE.
Changes made in Forscan.
ABS - 760-03-01 7xxx xx. With this one I get one ABS dtc. But if I put it back to as built. I still get the same dtc.
SCCM - 724-03-01 19xx xxxx xx
IPC - 720-01-01 xcxx 4xxx xxxx
IPC - 720-01-01 xfxx xxxx xxxx
IPC - 720-04-01 exxx xxxx xxxx
BCM - 726-13-01 xxxc 4xxx xxxx. When I do this one normal cruise will not work. So I put it back to the as built.
Normal cruise is still working. I do get one start-up warning.
Normal cruise active adaptive braking off.
Where did you come across the JL3Z-15K867-B? I got all the parts and while looking at the harness saw that there was no way it would reach the CCM, so I guess I need that too. For about $7 whatever. Also, the IPMA number you have listed is the same as the CCM. Did you have a different number for that? I also see that there are different ABS control units needed for pre-crash. I see a JL3Z-2C215-B and a JL3Z-2C215-D depending on build year range. Also, were you able to do the main harness without removing the bumper? One last thing, do you have a description on how you added power to the CCM?
Last edited by Iggy F-150; Mar 4, 2019 at 06:47 AM.