2018: Adding Adaptive Cruise Control
05-05-2018, 11:23 AM
#21
I have a IPMA from a Platinum that has the ACC. I'm waiting to order the CCM as Forscan doesn't have the compatibility to calibrate the 2018s IPMA/CCM yet. Once thats a green light I will install the new IPMA and CCM.
2018 CCM
H1BZ-9E731-AE
2018 CCM bracket
JL3Z-14C022-A
IPMA with Cads
JL3T-19H406-CE
2018 CCM
H1BZ-9E731-AE
2018 CCM bracket
JL3Z-14C022-A
IPMA with Cads
JL3T-19H406-CE
Thanks...sounds like we may be in the same boat. I have a 2018 502a with tech, including lane keep, but I don't think I have the IPMA? This is my very first time starting to look into this stuff...just got the truck and am still learning the buttons etc. For our reference, when you post parts, can you also include pricing?
05-05-2018, 12:58 PM
#22
Senior Member
Can you do just the CCM install on the 18's without the CAD & IPMA if you wanted just the pre-18 style ACC? Or would the firmware be wrong? A friend would like to add ACC to his 18 XLT - the same as I added to my 16 XLT. I told him - I didn't think it was possible yet, but thought I'd ask...
Yes I am sure you can for the 18 Raptor can come with ACC and not the Stop/ Go CADS.
05-05-2018, 09:04 PM
#23
Originally Posted by GeologyRocks
Thanks...sounds like we may be in the same boat. I have a 2018 502a with tech, including lane keep, but I don't think I have the IPMA? This is my very first time starting to look into this stuff...just got the truck and am still learning the buttons etc. For our reference, when you post parts, can you also include pricing?
05-06-2018, 09:28 AM
#25
Originally Posted by GeologyRocks
but not the one capable of adaptive cruise?
07-10-2018, 04:01 PM
#27
I would to add ACC to my 2018 F-150 lead foot lariat special edition. I have the 502a package. I would to make sure I’m ordering all the right parts I need. This is what I see I need so far.
CCM - H1BZ-9E731-AE on back order
CCM Bracket- JL3Z-14C022-A
Wire Harness -JL3Z-15K867-J wrong one had to order -G. So if anyone ordered the front harness. You need to know the type of fog lights installed.
Bolt - 9L3Z-19S426-A. Not sure if I need one or two.
Mount bracket studs - W717467-S439 and W717468-S439. Not sure of the qty of each of them.
HUD trim - FL3Z-15043C54-BA. installed it this last weekend
HUD - FL3Z-19G468-A. Installed it this last weekend
Steering wheel sw - JL3Z-9C888-FA. Installed it this last weekend
all help is welcome please.
thanks in advance
Jeff
CCM - H1BZ-9E731-AE on back order
CCM Bracket- JL3Z-14C022-A
Wire Harness -JL3Z-15K867-J wrong one had to order -G. So if anyone ordered the front harness. You need to know the type of fog lights installed.
Bolt - 9L3Z-19S426-A. Not sure if I need one or two.
Mount bracket studs - W717467-S439 and W717468-S439. Not sure of the qty of each of them.
HUD trim - FL3Z-15043C54-BA. installed it this last weekend
HUD - FL3Z-19G468-A. Installed it this last weekend
Steering wheel sw - JL3Z-9C888-FA. Installed it this last weekend
all help is welcome please.
thanks in advance
Jeff
Last edited by P51SVO; 07-31-2018 at 02:35 PM.
07-31-2018, 02:41 PM
#28
I also order and got the IPMA. So if the steering wheel switch and hud installed. And the changes in forscan. Normal cruise is still working. Just waiting on the -g front harness and the CCM to come in.
07-31-2018, 03:15 PM
#29
So the 18 ACC uses the camera too now? Is that for the pedestrian detection and auto start?