ok whitey and ak, lets see if your part finding abilities are up for a challenge. I have these fittings on my bendix power control valve body. The back right one is damaged and I need to replace it, but really Id like to just replace all four. Any clue where I could find some? Checked LMC, JBG, NPD, NAPA, Lowes, Autozone, Oreillys, Summit, Jegs, and Rockauto.

 

Holey crap lol. I don't think that can be straightened w/o making it weaker yet. What a predicament.

Have to hit a frame shop for that bad news.

 

I don't see a picture....was there supposed to be a pic?

 

Wow... that's a pretty big fine!




https://kutv.com/news/local/utah-cou..._gFilfzQOByz9o

 

huh that probably wouldve been helpful lol. Thought i clicked upload but i mustve forgotten. I edited my post to show the pic.

 

those fitting are standard brass fittings and can be bought from any hydraulics store, (Parker etc) or any good sized parts store. Nothing special about the early trucks and brass fittings. Nothing special like todays 27mm fittings no one has separate other than Dorman.

 

I'm shocked that NAPA couldn't supply those fittings. The bottom is std pipe either a 6 or 8 size, and the tops of the crowned are SAE 45 degree fittings. They could be 37 degree JIC but I am fairly sure they are SAE. The females are inverted probably 8 and 12's. Like I said above, these are standard but won't be found in todays books. You will need to have them matched. There was a time I could of given you Weatherhead numbers but that was 30 plus years ago.

 

I would try Grainger or McMaster Carr.

Do you know the sizes? Even MSC might have those.

 

Home Depot or Lowes have decent brass sections

 

Excellent