Me too! Hopefully I can get it done soon!

@brentr thank you for posting!

 

@TW3NTY2 @FHJ Anytime!

And just to save you some trouble, if you want to make changes using FORSCAN to adjust the speedometer for the tire size, in the BCM module, change line 726-12-01 to xxxx-0A6D-xxxx.

 

I really like the way your truck sits and want mine the same way. Could you tell me what you have for wheels and tires along with leveling kit. Thanks

 

Got the Bilstein 5100 at 1.75" setting installed this week, realizing how tiny the stock tires look :'( haha. Planning on Fuel Rebel 17" with AT3W 285/70R17

 

I have the same wheel on mine, 275/70R18 Wildpeaks really look better over the stock size. You can go taller/wider, I just didn’t want the cost difference and loose any more performance (until the next set &#128518 Unless you just want a 17” wheel 🤷🏻‍♂️

 

Based on what i've been reading, a 17" wheel with a beefier tire will help a lot with all the damn potholes around here. The Falkens are only 50lbs a piece so combined with the smaller wheel, the overall weight should be pretty close to the stock setup. And most importantly it looks cool!

 

how big of tires and rims are you running in this?

 

is this with factory offset ?

 

Do you have a picture from the side without the tires in the back?

 

Here’s one... And it’s clean.