When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
AFter 2.5" Rough Country level install. Front measures: 39.5(25.8 from hub), rear measures: 39.75(26 from hub) to fender. Also went with 15% window tint across the board.*
<br/><br/><br/>AFter 2.5" Rough Country level install. Front measures: 39.5(25.8 from hub), rear measures: 39.75(26 from hub) to fender. Also went with 15% window tint across the board.*
curious about this too, also how about adding how easy it was to install each of the kits, 1.5, 2.0 and 2.5. i know on my 2011 the 2.0 kit was a pain, so i had my friend order a 1.5 and it was a lot easier to put in.
I am getting a 2.5" Rough Country lift for the front along with an additional 1" block and new spring for the back, to go with some K02 BFG's next week.
I am getting a 2.5" Rough Country lift for the front along with an additional 1" block and new spring for the back, to go with some K02 BFG's next week.
Make sure they sent you some U bolts for the blocks. I couldn't install mine because they didn't come with U bolts. The guy at RC said we have kits with U bolts and kits without U bolts. I asked him why you buy blocks without U bolts.......to which he no answer.
Here is mine with a 2.5 level. I am a 1/4 inch higher in the front, but I did have a few things in the back.
I am getting a 2.5" Rough Country lift for the front along with an additional 1" block and new spring for the back, to go with some K02 BFG's next week.
Can you post pics when you get this done? I plan on doing the same once my truck comes in! What tire size are you going with?
Here is some good info on leveling kits and installs. First is the video of a 2 inch auto spring leveling kit. Then the install of a coil over leveling kit.
05-14-2015, 02:26 AM
The Leveling Kit Thread
