Bilstein 6112's up front @ top position ( 2")
Bilstein 5100's in the rear
295/65/18 Duratrac's
18 x 9.5 Rims ( +6 offset )
Omega Basic Tune

Totally different truck now, ride & handling much improved, but the biggest surprise for me is even with the level, canopy, larger & heavier rims and tires its actually snappier than when the truck was totally stock.

 

^ Your backend looks a little low but other then that it looks great.

 

Do these kits with the offset actually prevent the upper control arm from hitting the coil?

 

I have the icons up front with stock upper arms and at full extension are not even close to hitting. Might just be a spacer problem.

 

Looks good! As mentioned before, I think you could benefit from having the back a little bit higher. Get a 2.5" halo lifts block and you'll be money!

 

Yeah I agree. Your truck is badass

 

2018 King Ranch 3.5 6.5 bed. Bilstein 6112 upfront on the highest setting. Bilstein 5160 in the rear with an Autospring AAL with the factory block. Right around .5-.75" rake with the shell, sleeping platform, and a few other things in the back.

I tried to run 285/75-20 on the factory rims but the tire shop said that they were hitting the upper control arms at full lock. 275/65-20 fit perfect. The ride is firm but in a good way. No more body roll in the corners and it feels much more truck like now which I like. Overall very happy after 1 week.

 

Fox 2.0 coilovers, 1 inch rear blocks, 285/65r18 with 18x9 +1 offset.

 

Truck is looking sick! Waiting for my 5100's to come in for my truck. I'm looking to run the Coopers as well same size. Any complaints with the tires?

 

2” level with 285/65r20 Nitto’s on stock wheels.