Hints, Tips and Tricks
We have never owned any vehicle with that feature. I don't think anybody in our family has. It doesn't seem particularly common. Just, to be fair.
It may have been mentioned, but I haven't seen it yet. If you have the 360° camera, you can turn it on with the dash button at slow speed. If you hit the dash button again, you get full screen of the front camera only. Hit it a third time and you get the front and both mirror cameras. Hit it again and it turns the system off. With the truck in reverse, you get the same two extra views, only with the tail gate camera instead.
Last edited by So_Utah_Chad; Jul 13, 2019 at 05:04 PM.
I had the exact same thing. Checked that the camera cable wasn't disconnected to the tailgate. That was fine, so a call to dealer. 10 minute (free) flash of the sync 3 and it was up and running again.
Hope that helps.
Hope that helps.
Good to know. I’ll ask the dealer to have a look at it. Thanks!
I had the lane monitoring feature on a Fusion. It worked, but I would turn off often since it on many occasions would in my opinion correct you back in your lane too aggressively to where you felt out of control.
BTW, I programmed that BMW with ease, can't wait to try Forscan
Last edited by fhlh; Jul 18, 2019 at 11:14 PM.







