Hints, Tips and Tricks
#1471
Senior Member
#1472
Senior Member
when parking at a rest stop for a quick nap
don’t remove the key from the ign and lock doors with botton
on door than open door with door Handel to get out
You will wake up everyone within 100 yards
don’t remove the key from the ign and lock doors with botton
on door than open door with door Handel to get out
You will wake up everyone within 100 yards
Last edited by Ohsix; 04-18-2018 at 05:27 PM.
The following users liked this post:
arum81cake (04-22-2018)
#1474
How do I get this screen configuration on my truck?
#1475
Senior Member
#1476
Made it through 117 pages
lots of good info, thanks. I tried to disconnect the door chime and disconnected the blue and grey wire. This worked but only if the ignition is on. Any ideas which wire to turn it off for the accessories key position? I don't want to trial and error it in case I do something screwy and void the warranty lol.
lots of good info, thanks. I tried to disconnect the door chime and disconnected the blue and grey wire. This worked but only if the ignition is on. Any ideas which wire to turn it off for the accessories key position? I don't want to trial and error it in case I do something screwy and void the warranty lol.
Read the other thread (https://www.f150forum.com/f7/easy-gu...7/#post5470050) about this and came away thinking I just needed to discon the blue wire on my ‘18- confused...
This picture came from that thread-
Last edited by BeninCT; 04-23-2018 at 05:24 AM.
The following users liked this post:
trollo2984 (07-05-2018)
#1477
Senior Member
Don't know if this was mentioned because I kind of skipped through this thread, and I know it works for 15' and 16' trucks. If for some reason you forget your door code or purchased your truck used and didn't receive one you can retrieve it thru your info display, But you need both sets of keys or Smart Keys to accomplish this.
1: Insert 1st key into ignition and switch to on without starting it for about 4 seconds
2: turn ignition off and remove key
3: Insert 2nd key into ignition and switch to on without starting it, and your door code will display
Don't know how it works with the Smart Key, because I only have the actual keys and it worked for me.
Here's a youtube link that shows you how to do it with both styles of keys
1: Insert 1st key into ignition and switch to on without starting it for about 4 seconds
2: turn ignition off and remove key
3: Insert 2nd key into ignition and switch to on without starting it, and your door code will display
Don't know how it works with the Smart Key, because I only have the actual keys and it worked for me.
Here's a youtube link that shows you how to do it with both styles of keys