Topic Sponsor
2015 - 2020 Ford F150 General discussion on the 13th generation Ford F150 truck.
Sponsored by:
Sponsored by: Worksport

Factory sub

Old Jun 7, 2016 | 01:34 PM
  #1  
medic579's Avatar
Thread Starter
Senior Member
 
Joined: Feb 2011
Posts: 395
Likes: 7
From: Tallahassee
Default Factory sub

Ok I've been looking at threads on this and can't find a straight answer. Can I plug a factory sub into my xlt I have the nav and all that I do not have the Sony radio. Is there a plug I can look for behind the seat? Is there a factory sub option that is not Sony?
Reply

Popular Reply

Aug 23, 2016, 08:45 PM
NCRedneck's Avatar
NCRedneck
Member
 
Joined: May 2016
Posts: 95
Likes: 50
Default

Originally Posted by TexasFording
Can someone who has done it post the pin-out order for the wpt1212 harness?

Many thanks y'all!
with the 1212 harness facing away and wires facing toward you it's this...top is where the clip is that secures it to the harness.

Top left black is positive. Orange red on the factory side

Top far right is ground or negative. Black violet on the factory side.

Bottom left is remote turn on. Brown on factory side.

Bottom 2nd to left is line level + violet on the factory side

Bottom 3rd to the right is line level - green on factory side

All other wires are not used. Tape them off.
Old Jun 7, 2016 | 01:38 PM
  #2  
9'er's Avatar
5 Year Member
10 Year Member
Photogenic
Liked
Loved
 
Joined: Dec 2014
Posts: 386
Likes: 204
Default

Yes there is a factory kicker option. Not sure if trucks are prewired for it
Reply
Old Jun 7, 2016 | 03:21 PM
  #3  
nad's Avatar
nad
Senior Member
 
Joined: Nov 2015
Posts: 1,013
Likes: 225
Default

It's not cheap.

http://www.stage3motorsports.com/PF1...r-Amp-Kit.html
Reply
Old Jun 7, 2016 | 05:28 PM
  #4  
lucas8888's Avatar
Senior Member
Supporting Member

10 Year Member
Liked
Loved
Community Favorite
 
Joined: Feb 2015
Posts: 1,421
Likes: 372
From: SE MI
Default

There is a plug hidden behind the trim for the left rear seat belt. I'm hoping this is for the sub so I don't have to tap the rear speakers. From the wiring diagram I have seen it looks like there should be a sub signal and amp turn on there. But this has different colors so not sure yet.


Reply
Old Jun 7, 2016 | 05:39 PM
  #5  
dhmcfadin's Avatar
Senior Member
 
Joined: Mar 2016
Posts: 3,992
Likes: 1,220
Default

For trucks with Sony, the truck has a sub channel output plug behind the drivers side rear seat, for trucks without Sony, there is no sub output. You need a line-out converter or dsp.
Reply
Old Jun 7, 2016 | 06:06 PM
  #6  
lucas8888's Avatar
Senior Member
Supporting Member

10 Year Member
Liked
Loved
Community Favorite
 
Joined: Feb 2015
Posts: 1,421
Likes: 372
From: SE MI
Default

After looking at the wiring diagram again the violet is sub + and green is sub - . Brown is enable /clip detect.

I have a non Sony without a sub

If I have time tonight I will see if I turn on the sub in forscan if the enable will turn on
Reply
Old Jun 7, 2016 | 06:34 PM
  #7  
dhmcfadin's Avatar
Senior Member
 
Joined: Mar 2016
Posts: 3,992
Likes: 1,220
Default

Originally Posted by lucas8888
After looking at the wiring diagram again the violet is sub + and green is sub - . Brown is enable /clip detect. I have a non Sony without a sub If I have time tonight I will see if I turn on the sub in forscan if the enable will turn on
Without Sony, there is no amp to push the sub.
Reply
Old Jun 7, 2016 | 06:39 PM
  #8  
lucas8888's Avatar
Senior Member
Supporting Member

10 Year Member
Liked
Loved
Community Favorite
 
Joined: Feb 2015
Posts: 1,421
Likes: 372
From: SE MI
Default

Originally Posted by dhmcfadin
Without Sony, there is no amp to push the sub.
You do realize you can get a factory sub / amp on a non sony right?
Yup that's why I want the signal so I can add one without tapping the rear speaker wires.

The big brown/red wire is a 20amp but too small for anything really

Last edited by lucas8888; Jun 7, 2016 at 07:22 PM.
Reply
Old Jun 7, 2016 | 09:54 PM
  #9  
gtz's Avatar
gtz
Member
 
Joined: Oct 2011
Posts: 80
Likes: 10
Default

Originally Posted by lucas8888
After looking at the wiring diagram again the violet is sub + and green is sub - . Brown is enable /clip detect.

I have a non Sony without a sub

If I have time tonight I will see if I turn on the sub in forscan if the enable will turn on
I am interested in this. I wonder if you enable the subwoofer option in forscan you will be able to adjust the sub setting in the stereo. I have never messed with a Sony system but I assume you should be able to. I am currently running my amp signal thru my rear speakers and would love to be able to tap into a dedicated sub signal.
Reply
Old Jun 7, 2016 | 10:12 PM
  #10  
Aashu's Avatar
5 Year Member
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Apr 2016
Posts: 649
Likes: 54
From: scotch plains, nj
Default

Curious. What. Option includes a sub on dot and lariat
Reply

Thread Tools
Search this Thread

All times are GMT -4. The time now is 10:38 PM.