When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
LOL.... you should see the latest shenanigans. I've already been told not to post pictures with swear words on here, so I will refrain. But yeah, Skylar has resorted to name calling.
He's went off a few times here, not too much. If only he would research and ask questions about explanations he doesn't fully understand vs the ladder, -ignoring, starting new threads or resorting to a name change. He would move forward much quicker.
Dang did I miss a thread!? I haven't seen anything (besides him starting another thread lol) to be fair I guess it is actually a different problem but he just needs to keep everything to one thread right now. Way to scatterbrained
It's on FB this time. He's worn out his welcome on all of the FB groups too.
Skylar enjoys getting hit with the BAN HAMMER!
Last edited by white89gt; Oct 4, 2018 at 05:07 PM.
White, I was wondering if it would be worth $75 to invoke your House warranty again and make the repair someone els'e problem?
I called them... and they said if the drain was leaking, or the faucet.... it would be covered. It covers a cracked toilet, but not a cracked shower, lol.
Huh, you'd think they would want to avoid water leaking that could destroy structure/drywall etc. I guess the bean counters over there don't think that far ahead. Well hopefully you can get that Napco piece. There must be a White's Plumbing around somewhere you could tell them you are from so they'll sell it to you.
Yep, bean counters is exactly right. I keep hoping the oven will die, lol. It's a giant POS from 1998 - still has coil burners. I need a new Maytag with the glass top. The rest of the kitchen has been updated. Look at the damn eye sore.
Sooooooo.... this guy has a pretty damn similar setup on the motor, but he's carb'd. His is a stroked 347, mine is a 351. Should be similar....
Originally Posted by raw85
All tests done on the same dyno under similar conditions.
Old setup was 347, 170 CC box stock TFS heads(pedestals), 1.72 FMS rockers, Comp XE274HR, BBK 15/8 long tubes running into xpipe with converters, 2.5 magna flow exhaust, mezzeire electric water pump, RPM air gap, 650 demon, electric fan, underdrive pulleys.
It dynoed 392 HP and 401 TQ.
New setup 347, 190 CC fast as cast milled to 58cc with pocket porting , 1.72 comp rockers, comp xe274HR,BBK 15/8 long tubes running into xpipe with conveters, 2.5 magna flow exhaust, mezzeire electric water pump, RPM air gap(opened up the ports to gaskets), 650 demon, electric fan, underdrive pullyes.
New numbers 425 HP and 417 TQ. It gained every where throughout the range. Power was still climbing at 6300, might of touched 430, if run to 6500 or 6600 rpm. Gained 33 hp at peak and the gains after peak were greater!
Last edited by white89gt; Oct 4, 2018 at 09:11 PM.
