Headlight switch question.
RDNK150
Joined: Nov 2011
Posts: 2,390
Likes: 66
From: Pembroke, Ma
Thread Starter
Senior Member
Joined: Dec 2013
Posts: 6,446
Likes: 402
i think thats the next step! Did your harness have 4 pins and the board have 5? Its definitely the factory harness and has never been messed with.
Senior Member
Joined: Jul 2014
Posts: 2,281
Likes: 177
Apparently the Auto lamp module and light sensor are one unit. So you have everything. Either you have a bad head light switch or a bad sensor. Sorry about that I had to dig thru the ford factory manual to find it. Upon further investigation that plug with the jumper looks to be for the DRL module.
Thread Starter
Senior Member
Joined: Dec 2013
Posts: 6,446
Likes: 402
Will http://www.ebay.com/itm/141598926830...S:1123&vxp=mtr fit? Looks identical, harnesses are in the same orientation. But it says "AK" and mine says "DK"
Last edited by 02_Black_On_White; Mar 12, 2015 at 08:41 PM.
RDNK150
Joined: Nov 2011
Posts: 2,390
Likes: 66
From: Pembroke, Ma
Will http://www.ebay.com/itm/141598926830...S:1123&vxp=mtr fit? Looks identical, harnesses are in the same orientation. But it says "AK" and mine says "DK"
Thread Starter
Senior Member
Joined: Dec 2013
Posts: 6,446
Likes: 402
Member
Joined: Jun 2010
Posts: 49
Likes: 0
From: London Ontario Canada
I have a similar problem on my 01 Screw.
I need DRL's to get my truck through a safety inspection.
I understood that I needed a modual from under the front Dr side fender.
I picked that up at the junk yard today. I'll take a picture of it tomorrow and post it. I will have to look under my dash now to wee what I have there too.
I don't recall ware I heard about the front modual that I picked up today. It's been a few years since I worked on the truck. Or even thought about it.
I need DRL's to get my truck through a safety inspection.
I understood that I needed a modual from under the front Dr side fender.
I picked that up at the junk yard today. I'll take a picture of it tomorrow and post it. I will have to look under my dash now to wee what I have there too.
I don't recall ware I heard about the front modual that I picked up today. It's been a few years since I worked on the truck. Or even thought about it.
Senior Member
Joined: Sep 2011
Posts: 7,381
Likes: 435
I have a similar problem on my 01 Screw.
I need DRL's to get my truck through a safety inspection.
I understood that I needed a modual from under the front Dr side fender.
I picked that up at the junk yard today. I'll take a picture of it tomorrow and post it. I will have to look under my dash now to wee what I have there too.
I don't recall ware I heard about the front modual that I picked up today. It's been a few years since I worked on the truck. Or even thought about it.
I need DRL's to get my truck through a safety inspection.
I understood that I needed a modual from under the front Dr side fender.
I picked that up at the junk yard today. I'll take a picture of it tomorrow and post it. I will have to look under my dash now to wee what I have there too.
I don't recall ware I heard about the front modual that I picked up today. It's been a few years since I worked on the truck. Or even thought about it.
Senior Member
Joined: Jul 2014
Posts: 2,281
Likes: 177