Here is mine with bilstien 5100s set at top level and with a 2in rear block. On 285/65/20 K02

 

Anyone have the infamous “hop” after installing a 2” RC lift? It occurs when you crank the wheel all the way to the left or right. My 09’ had it when I installed a lift on that, I immediately noticed it on my 19 as well. Just wondering if anyone has had the same experience and if there are any solutions out there.

 

Not sure what you mean by "hop". 2" RC lift, assuming spacer? Everything tight? Only thing I'd think that could bind, if that's what you mean by "hop" would be the CV's, but hard to imagine that.

 

Sounds like tire rub !

 

Could be, need to know what is being used as far as wheel/tire specs, they'd be helpful too. Was there an alignment done?

 

9663mu, your truck is darn near perfect!

My favorite looking model, Lariat Sport, with probably my favorite tire size for these trucks. What is the offset of those wheels? It also looks about perfect as they don't stick too far out like most.

 

@9663mu ^^^^^

 

Thanks fellas. Front bilstien 5100 set at top perch and a 2in rear block. Just got some K02 285/65/20. Helo 20x9 +18 She rides very nice. Rear bilstien are next. Here is quick one this morning washes

 

Stock 20” rims and tires no offset. Gets aligned tomorrow.

 

That just might take care of the trouble. Sometimes things don't change, other times they do big time. What are you meaning by hop?