When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Installed a Diode Dynamics 18" light bar today. Originally tried putting it in the lower bumper but it would have required running to the store and getting some new brackets that may or may not have worked. Decided to just put it on the bumper. Had to notch the plastic trim to get a ¼" +/- more clearance to get it under the grille. Not perfect though. Was hard to notch it without removing the trim which would have taken forever. Took 4 hours from picking it up off the porch to being test drive ready! After learning the little tricks I can say it would have taken about 2 hours! Very happy with it!
Installed a Diode Dynamics 18" light bar today. Originally tried putting it in the lower bumper but it would have required running to the store and getting some new brackets that may or may not have worked. Decided to just put it on the bumper. Had to notch the plastic trim to get a ¼" +/- more clearance to get it under the grille. Not perfect though. Was hard to notch it without removing the trim which would have taken forever. Took 4 hours from picking it up off the porch to being test drive ready! After learning the little tricks I can say it would have taken about 2 hours! Very happy with it!
Well tomorrow I have an appointment set up after work at the local tire shop to get new tires. Going with the Yokohama Geolandar A/T GO15s like I was planning on a while back.
