When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
AK, I found a bunch of those Toyota columns on Hollander. Have you had any luck with the sellers messaging you back? I am trying to get them to also give me the intermediate shaft so I have something to weld to. Just curious if you've ever got a response - because any time I've sent a message on car-part.com, I never get a reply.
Whitey.....send me a pm with the link you are trying to use. I'll find you a seller who is decent and will ship to Utah. I'm on the Hollander exchange with the yard in Fairbanks, so I should be able to find you an answer.
Red got the FX4's back on today to go with the oem t/s mirrors. Slowly he's getting back to what I decided iI wanted to be to him this summer. Grille shell and new bumper are next once the weather gets rid of the moisture in the air.
AK, thanks for the help via Hollander. I wound up talking to a friend of a friend at one of the yards here that I had forgotten about. I usually go to these guys for more major stuff like axles, transmissions, etc. - so it didn't even enter my mind.
Anyway, they don't allow anyone in the yard, which means the prices are a little higher than other yards around town... BUT, everything that i have gotten there has always been in better shape than anywhere else. And, they actually have a 2009 Prius. He's going to pull it in the morning then call me. I am getting the column, intermediate shaft, and the control module (and all of the pigtails) for 135 dollars. It's guaranteed too, so I'll get it hooked up before I start cutting it up, LOL.
Right now though.... trying to come up with my own rib rub that's not spicy. I am the only one that likes spicy in the house, so I need to appease the ladies, LOL. Do any of you have any rib rub (or any meat rub) recipes you'd care to share? My nephew sent me a Green Mountain Daniel Boone Prime smoker. I love it... just trying to dial in my recipe a bit.
EDIT: AK... do you recall how much those wheels weigh, and the box dimensions?
Wheels about 26-28# each. EIther loose, 5 pieces, or 2 boxes about 20 x 20 x 20. About 110# overall Let me know.
\
I took 2 sets of the FX4 rims up to Sutton and put them in my boat. I don't really have enough room to store all the wheels and tires. At least up there, they are closer to my lake place, so it wouldn't take as long to finish moving them back to my tire racks on the front wall. I almost lost that new set of Mustang wheels to Pat Luckily they were too wide for the front of his older Stang. Otherwise I might of had to fight to keep them. lol. I gave him my old original Mustang rims (16 in) like Whitey had on his Escape.
