Engine Builders talk.
#431
#432
#433
Senior Member
Thread Starter
I need to find a complete 2v. It can have a cracked block, broken rod, etc doesn't matter. I just need a lot of misc parts like, pan, front cover, valve covers, misc bolts, and i would like to have spare parts. I've tried eBay, CR, and a few yards with no luck. The cheapest I found was $800. A y suggestions?
#434
Intake gaskets got here quick from ebay. Still waiting on lash adjusters and oil pan studs to show up. Going to soak the rocker arms in oil and reuse them. Nothing wrong with them just want to get all the dirt/dust off.
Anyone know where I can intake manifold bolts? Searched everywhere and cant find them.
Anyone know where I can intake manifold bolts? Searched everywhere and cant find them.
#435
No idea on that.. Might have to bite the bullet an try to get them from Ford. I do know on the Navi's particularly most of the bolts have completely different lengths. Also make sure you replace the heater feed tube that goes from the back of the water pump to the rubber hose for the heater inlet. it will be cheap insurance to prevent you from having to pull the manifold again.. Its a pita in a stock truck but the body lift will help alot..
#436
Hey travers auto in Michigan is where I got my navi engine. They have a 2v for 650 obo. They have cheap shipping too. Offer them 650 shipped and I guarantee you'll get it. It's the expulsion engine on eBay. Type in 5.4 engine and it's like 5 down the page. Red expy.
No idea on that.. Might have to bite the bullet an try to get them from Ford. I do know on the Navi's particularly most of the bolts have completely different lengths. Also make sure you replace the heater feed tube that goes from the back of the water pump to the rubber hose for the heater inlet. it will be cheap insurance to prevent you from having to pull the manifold again.. Its a pita in a stock truck but the body lift will help alot..
#437
No idea on that.. Might have to bite the bullet an try to get them from Ford. I do know on the Navi's particularly most of the bolts have completely different lengths. Also make sure you replace the heater feed tube that goes from the back of the water pump to the rubber hose for the heater inlet. it will be cheap insurance to prevent you from having to pull the manifold again.. Its a pita in a stock truck but the body lift will help alot..
#438
Senior Member
Thread Starter
#439
I found a core for the great price of $100.. Just have to go pick it up.. Its a 2v, but i have all the parts for a 4v so..
#440
Sooo.... Who knows where i can buy a well built 4r70w? Anyone used lentech or heard about them? My transmission grenaded itself at the track. So much for the shortblock funds haha.
http://www.lentechautomatics.com/streetetrans.html
http://www.lentechautomatics.com/streetetrans.html
Last edited by 4x4dave; 05-17-2014 at 10:55 AM.