Thanks for your help, yes I am referring to the camera buttons on the top. so if i get a XLT bezel can I add a camera button? or should i get the lariat bezel and remove buttons that I am not using? Last question, can i use the single AC **** from my current XLT bezel to swap the ac button on a Lariat bezel? just all the possibilities i have been thinking about. thanks again.

 

Thanks for your help, yes I am referring to the camera buttons on the top. so if i get a XLT bezel can I add a camera button? or should i get the lariat bezel and remove buttons that I am not using? Last question, can i use the single AC **** from my current XLT bezel to swap the ac button on a Lariat bezel? just all the possibilities i have been thinking about. thanks again.

 

Like it was answered above, all features will work except dual temp zone. You'll be getting DTCs about the solar sensors and discharge sensors being faulty (because you dont have them), but fan speed, flow direction, etc will work.

 

The question is what do you need the camera button for, are you adding the external cameras to your truck? It has no use with the standard backup camera. Any bezel can be made to work, it's all in the programing, the buttons at the top have no relation to the bezel.

 

Thanks A lot.I am very anxious about programming the apim and doing the wiring myself , where can I get a copy of that wiring spreadsheet? any ideal?

 

If it's the one I think you're talking about; me.

 

 

 

I have an aftermarket rear camera that shows in the rearview mirror, I want to change it so that it will show on sync dash screen. would like to be able to toggle through the switch.

I have a chance to pick up a screen and apim sync 3 with Nav for 600 from a 2016 ford edge SEL . Will it work in F150's and Is that a good deal?

apreciate any help. Thanks again.

 

Hey all,

Does anyone know where I could sell my Sync 2 and Sync 3 units? Just upgraded to the Tesla head unit.