Programming a 3rd Intelligent Access Key
Senior Member
Joined: Jan 2016
Posts: 116
Likes: 74
Has anyone used this below for 2016 F150?
Ive had no joy with my attempts key Key fob up or down?
It was eBay genuine Ford seller factory sealed fob only thing is not certain if its ever been programmed perhaps to another vehicle?
The online instructions clearly are very different to the below, below makes much more sense but still no joy all round! I get no notifications. Im starting with ignition off initially.
Tony
Ive had no joy with my attempts key Key fob up or down?
It was eBay genuine Ford seller factory sealed fob only thing is not certain if its ever been programmed perhaps to another vehicle?
The online instructions clearly are very different to the below, below makes much more sense but still no joy all round! I get no notifications. Im starting with ignition off initially.
Tony
Hope that helps!
Senior Member
Joined: Jan 2016
Posts: 116
Likes: 74
Any way to reset/zero out a preprogrammed remote, maybe thats my issue.
Or maybe its not compatible after all. Has anyone successfully added a eBay remote that doesn't show a tailgate but has a trunk logo. For $40- I can't imagine you got a tailgate logo given my searches, the ford part numbers seem to overlap regardless.
There're two styles of 5 button remote one that is linear with all 5 buttons in a row and one that has the two buttons at top open/close thats mine,
Or maybe its not compatible after all. Has anyone successfully added a eBay remote that doesn't show a tailgate but has a trunk logo. For $40- I can't imagine you got a tailgate logo given my searches, the ford part numbers seem to overlap regardless.
There're two styles of 5 button remote one that is linear with all 5 buttons in a row and one that has the two buttons at top open/close thats mine,
Cheers!
Senior Member
Joined: Jun 2011
Posts: 107
Likes: 15
I can confirm, my experience was the same as Mr. Unlimited. Used from eBay is good; you don't have to erase the previous program. I followed the procedure in post #16, with five seconds between steps. Although someone above had success with three seconds between steps.
Maybe the key is to use exactly the same time delay between each step, whether it is three or five seconds. The manual says wait between three and ten seconds but that wide range in timing did not work for me.
I did buy from a seller that stated it would work on a 2016 F150. If you are unsure, buy from someone who accepts returns. But you probably won't be sending it back!
Maybe the key is to use exactly the same time delay between each step, whether it is three or five seconds. The manual says wait between three and ten seconds but that wide range in timing did not work for me.
I did buy from a seller that stated it would work on a 2016 F150. If you are unsure, buy from someone who accepts returns. But you probably won't be sending it back!
Member
Joined: Aug 2016
Posts: 60
Likes: 11
2015 Ford F-150 Platinum
Programming Spare Intelligent Access key
--
The vehicle may have a maximum of four keys programmed
--
(Must have 2 programmed keys in order to program a third or fourth key)
--
The backup starting location is located under the rubber mat in the bottom of the storage compartment in front of shift lever
---
Make sure all doors are closed and remain closed
---
Remove all keyrings from the two programmed and the unprogrammed Intelligent Access keys so they will lie within the backup starting location
---
If the key does not successfully program, wait at least 10 seconds before attempting to repeat the procedure
1
Place first programmed passive key in the backup starting location
2
Press Start/Stop button
3
Wait 5 Seconds
4
Press Start/Stop button
5
Remove the first programmed passive key from the backup starting location
6
Within 10 Seconds, Place the second programmed passive key in the backup starting position
7
Press Start/Stop button
8
Wait 5 Seconds
9
Press Start/Stop button
10
Remove the second programmed passive key from the backup starting location
11
Wait 5 Seconds
12
Place unprogrammed passive key in the backup starting location
13
Press Start/Stop button
14
Wait 5 Seconds
15
Press Start/Stop button
Programming Spare Intelligent Access key
--
The vehicle may have a maximum of four keys programmed
--
(Must have 2 programmed keys in order to program a third or fourth key)
--
The backup starting location is located under the rubber mat in the bottom of the storage compartment in front of shift lever
---
Make sure all doors are closed and remain closed
---
Remove all keyrings from the two programmed and the unprogrammed Intelligent Access keys so they will lie within the backup starting location
---
If the key does not successfully program, wait at least 10 seconds before attempting to repeat the procedure
1
Place first programmed passive key in the backup starting location
2
Press Start/Stop button
3
Wait 5 Seconds
4
Press Start/Stop button
5
Remove the first programmed passive key from the backup starting location
6
Within 10 Seconds, Place the second programmed passive key in the backup starting position
7
Press Start/Stop button
8
Wait 5 Seconds
9
Press Start/Stop button
10
Remove the second programmed passive key from the backup starting location
11
Wait 5 Seconds
12
Place unprogrammed passive key in the backup starting location
13
Press Start/Stop button
14
Wait 5 Seconds
15
Press Start/Stop button
Mike
I have two fobs with remote start - want to get a third key as a backup, but does not have to be remote start it it saves some $$$
Can I program a third (or forth) key fob that does have have remote start if my original two lets do have it?
Can I program a third (or forth) key fob that does have have remote start if my original two lets do have it?
Community Team
Joined: Jun 2015
Posts: 2,608
Likes: 556
From: Florida
.
Note to self - next time read to the END of the thread. My poor seats are wired from run it back and forth with 5 second intervals over and over.... 3-4 seconds and a quick swap was the magic trick.
The eBay fob I got did not have a blank backup key - can just the metal backup key portion these be purchased from Ford? The fob is mainly for a backup if we lose one but would be nice to have the backup metal key too.
The eBay fob I got did not have a blank backup key - can just the metal backup key portion these be purchased from Ford? The fob is mainly for a backup if we lose one but would be nice to have the backup metal key too.
Junior Member
Joined: Jan 2016
Posts: 11
Likes: 3
As preventative I purchases two 128 bit high security transponder key blanks (no remote buttons) for my 2016 F150 XLT SuperCrew
Strattec blank # 5923293 for $17.00 each from this online store
http://www.clksupplies.com/products/...er-key-5923293
Took the to a local lock & key store who cut them for $15.00 each; So for $32.00 each I have spare keys. Loads cheaper than dealer pricing.
Following instructions in the owners manual with the 2 factory key fobs the new keys were matched to my truck and work perfectly.
Strongly suggest doing this before you lose one of the factory keys otherwise you're stuck having to get ripped by the dealer.
Strattec blank # 5923293 for $17.00 each from this online store
http://www.clksupplies.com/products/...er-key-5923293
Took the to a local lock & key store who cut them for $15.00 each; So for $32.00 each I have spare keys. Loads cheaper than dealer pricing.
Following instructions in the owners manual with the 2 factory key fobs the new keys were matched to my truck and work perfectly.
Strongly suggest doing this before you lose one of the factory keys otherwise you're stuck having to get ripped by the dealer.
5 Year Member
Joined: Jan 2013
Posts: 482
Likes: 44
I purchased a fob today... few questions I have. If I were to end up losing one of the three (likely one of the original two as the one I purchased will be the spare), can you then add a 4th with just any two remotes or do you need all 3?
Second question, is there a way to remove keys from the list - ie the lost one?
Second question, is there a way to remove keys from the list - ie the lost one?
Junior Member
Joined: Sep 2016
Posts: 20
Likes: 1
? for you all
# 16 post and # 32 are slightly different
can someone clarify
after putting in 2nd remote and hitting start stop button do you then remove and put in new (3rd) remote and then hit start stop
or do you put in 2nd remote hit start stop and then wait 3 secs and hit start stop again and then remove 2nd remote and insert 3 rd remote and hit start stop
# 16 post and # 32 are slightly different
can someone clarify
after putting in 2nd remote and hitting start stop button do you then remove and put in new (3rd) remote and then hit start stop
or do you put in 2nd remote hit start stop and then wait 3 secs and hit start stop again and then remove 2nd remote and insert 3 rd remote and hit start stop