I've got the regular Fox2.0's, not the factory shocks. The ones you show in that link, are the ones I'm using.

 

If you want to make your own. I made these this weekend and installed on a 2015 f150 XLT. Fit perfect. I did the 2" version and got 2-1/16"lift on the front.
I could have bought these for ~$50.00 but it gave me something to do.

 

Yes... I know its posted in 37 other threads but here is mine from Yesterday. Beyond stoked with the Bilstein 6112/5160 combo set up 2" in front with Raptor Takeoffs.

 

Does anyone know what aftermarket wheel offset is needed for 35x12.5 tires to be flush with the fenders? By my calculations it needs to be about +28mm?

 

The raptor wheels/tires are +34 offset on a 17x8.5 wheel, with a 315/70/17 tire (35 by 12.5+ a little). They're 'flush' IMO. +28 is close enough to +34 (assuming same wheel width) that you can use the raptors as guide for the look you want.

 

2019 Ford F-150 STX 4x4 with front level sitting on factory 20s wrapped in 35x12.50x20 Nitto Ridge Grapplers. No rubbing at all. I love my set up.

 

Looks great, how much of a level did you go for?

 

Honestly I don’t have a clue. I had them put on the level, alignment, and tire swap before I bought it new 2 weeks ago from the dealership.

 

Got mine leveled today. Leveling kit in the front with 285/65/18 Nitto Ridge Grapplers

 

Yes, That looks great! I've got a 2" lift with 13 1/2" between the top of the rim and the wheel well. the blocks were 1 1/2". Go figure. The STX rims look great. I'm keeping mine.