Adding reverse sensing to 2019 xlt
Thread Starter
Junior Member
Joined: Jan 2019
Posts: 16
Likes: 2
From: Northeast USA
Adding reverse sensing to 2019 xlt
I am trying to get enough info to get all the parts to add the factory reverse sensing system to my truck. I have looked all over and can't find where to buy a shop manual to help guide me through the process. Many of you have helped me before please help again. Thank you
wow..they took away the sensors from the 302A package?! it used to be you get a 302a you got them automatically. Let me do some digging in fords WSM and see how the system works. I might be able to help
from fords WSM...you might be able to add it but I'm not sure its worth it
the PAM is part of the BCM, so that is different as well. Cluster might be different but its hard to say
The rear parking aid system sounds a warning tone through the rear audio speakers to alert the driver of objects near the rear bumper when the transmission is in reverse. The rear parking aid system assists the driver in detecting certain objects when the vehicle is stationary or moving slowly in reverse. The rear parking aid system may not detect moving objects.
The parking aid system is disabled if a fault is detected in a parking aid sensor, the communications network or the PAM. This is indicated by a parking aid disabled warning message in the IPC message center.
The parking aid system is enabled and disabled through the message center, located in the IPC. Disabling the parking aid system lasts one key cycle.
If a MyKey® restricted key is in use, the parking aid menu is not available in the message center and cannot be deactivated.
The parking aid system is disabled if a fault is detected in a parking aid sensor, the communications network or the PAM. This is indicated by a parking aid disabled warning message in the IPC message center.
The parking aid system is enabled and disabled through the message center, located in the IPC. Disabling the parking aid system lasts one key cycle.
If a MyKey® restricted key is in use, the parking aid menu is not available in the message center and cannot be deactivated.
Thread Starter
Junior Member
Joined: Jan 2019
Posts: 16
Likes: 2
From: Northeast USA
I know I need a new harness in the rear too. The sensors are in with the trailer harness. Is there any way you have the run-out for that connector so I can verify wiring in my main harness?
Trending Topics
