2016 Tracking Thread
Senior Member
Joined: Mar 2016
Posts: 104
Likes: 7
ETIS is filled in (yesterday or the day before), but it shows:
3.55
Less Elect Locking Differential
With 9.75" Axle
Hopefully stbtigerr is correct!!
5 Year Member
Joined: Dec 2015
Posts: 617
Likes: 77
Have your dealer check the invoice... But seems ETIS gets that wrong every time. Was wrong on mine also.
Only slightly worried about the specs...
I ordered the 3.55 Locking Differential and "ETIS"
(which I don't have a lot of faith in from reading on here) shows it's not on there.
I checked the order, it was definitely listed.
The problem though, is everything else looks to be correct.
I wonder if the dealer can easily add it if it's missing?? I wonder if they would?
I ordered the 3.55 Locking Differential and "ETIS"
(which I don't have a lot of faith in from reading on here) shows it's not on there.
I checked the order, it was definitely listed.
The problem though, is everything else looks to be correct.
I wonder if the dealer can easily add it if it's missing?? I wonder if they would?
5 Year Member
Joined: Feb 2016
Posts: 78
Likes: 16
I looked at EITS again, closer this time. The 'Less Elect Locking Differential' entry is present on mine too only with 8.8 inch rear. The window sticker definitely shows a 3.55 locking differential though.
Senior Member
Joined: Mar 2016
Posts: 153
Likes: 22
From: North of Denver
5 Year Member
Joined: Feb 2016
Posts: 78
Likes: 16
I'll bet our two trucks are travelling together. If you are anywhere near Philly we are very close.
Senior Member
Joined: Nov 2013
Posts: 235
Likes: 19
From: Eugene, OR
Dealer finally got back to me today. Called to let me know the good news that my truck was built and should be here by the 28th. Weird that COTUS doesn't show it as produced and gives me a delivery date of 5/12 but thats fine.
Asked him again about the 5.0 vs 2.7 build. Said that I could wait until it comes in to confirm. He ended up looking my vin up and ****ting bricks, went to his manager who was apparently livid as well. Called me a hour later to assure me that they don't understand what happened but that I wont have to pay for it and they will give me the customer cash from the 2.7 that I had locked in.
Decided that I don't care to push it because it is not the dealerships fault and I am happy with this resolution.
Vehicle MSRP is 37925 and I will be paying ~31500 assuming there are no new incentives that I will get. Might be able to get program 12918 for an additional 1500 but I'm not going to hold my breath
Asked him again about the 5.0 vs 2.7 build. Said that I could wait until it comes in to confirm. He ended up looking my vin up and ****ting bricks, went to his manager who was apparently livid as well. Called me a hour later to assure me that they don't understand what happened but that I wont have to pay for it and they will give me the customer cash from the 2.7 that I had locked in.
Decided that I don't care to push it because it is not the dealerships fault and I am happy with this resolution.
Vehicle MSRP is 37925 and I will be paying ~31500 assuming there are no new incentives that I will get. Might be able to get program 12918 for an additional 1500 but I'm not going to hold my breath
Last edited by Ned Fletcher; Apr 7, 2016 at 04:58 PM. Reason: forgot that I paid a deposit
5 Year Member
Joined: Feb 2016
Posts: 78
Likes: 16
Just got back from reviewing paperwork at my dealer. The date they had for receipt of my truck was 4/21, but my salesman thinks it will be sooner than that. He thinks I'll see it next week.
On a side note, someone was there taking delivery of a Limited. Only one I have ever seen, and man is it nice. Especially the wood trim inside, along with all that leather.
On a side note, someone was there taking delivery of a Limited. Only one I have ever seen, and man is it nice. Especially the wood trim inside, along with all that leather.
Member
Joined: Mar 2016
Posts: 36
Likes: 6
Member
Joined: Mar 2016
Posts: 67
Likes: 20
From: Edmonton, Alberta