Brake Controller
If you go the aftermarket route here's a video what you'll get into
https://www.etrailer.com/Brake-Contr...sha/90885.html
https://www.etrailer.com/Brake-Contr...sha/90885.html
If you go the aftermarket route here's a video what you'll get into
https://www.etrailer.com/Brake-Contr...sha/90885.html
https://www.etrailer.com/Brake-Contr...sha/90885.html
Thanks Mike. I was looking at this one and the P3. Watching this video, everything seems pretty straight forward.
i would deff go OEM. it is intergrated w/ the truck and they brake as a unit w/ sway controls built in vs an aftermarket BC. I got the "dorman" version of BC < i think dorman makes the ford OEM but its $$ cheaper and works just the same. I also went the "forscan" route as that has enabled my to get remote start, trailer brake, bambi mod all WITH OUT going to the dealer!
i would deff go OEM. it is intergrated w/ the truck and they brake as a unit w/ sway controls built in vs an aftermarket BC. I got the "dorman" version of BC < i think dorman makes the ford OEM but its $$ cheaper and works just the same. I also went the "forscan" route as that has enabled my to get remote start, trailer brake, bambi mod all WITH OUT going to the dealer!
Is this what you used?
https://www.ebay.com/itm/15-thru-19-...75.c1#viTabs_0
Last edited by Snoopy49; Sep 24, 2019 at 03:45 PM.
Could you send me some more info on what all is needed? I would like to check into this more as well. Thanks
Is this what you used?
https://www.ebay.com/itm/15-thru-19-...75.c1#viTabs_0
Is this what you used?
https://www.ebay.com/itm/15-thru-19-...75.c1#viTabs_0
apologies, i have a 2011, but the 15-19 OEM TBC are cheaper whether it be dorman or ford oem.
but you'll need
-the oem or dorman tbc that plugs direct into the plug behind the dash (NOT AFTERMARKET):
-also you'll need to download and read the sticky for "forscan software" < if you dont want to dink with ur ECU then dealer can flash it to work for free-$100 dept on dealer.
- if you go forscan you'll need a ODB2 to usb cord : to connect to the truck
thats about it. i think it'll work the same for a 15-19 vs a 11-14 as far as forscan goes.
PSS: if you go OEM its a part of the dash and integrates seamlessly, if aftermarket itll stick below the dash as the P3 does
Last edited by BRUTE448; Sep 24, 2019 at 09:15 PM. Reason: info
Do you not have the "cubby hole" to the LH side of the radio/climate controls as shown in the following video?:
https://www.youtube.com/watch?v=itvCfYhqPws
https://www.youtube.com/watch?v=itvCfYhqPws
For some stupid reason I had it in my head this morning that it would go on the gray portion of the dash just left of the actual location. I need to go back to sleep!
A little late, but are you just looking for the OEM IBC? Your dealer wants $350? Fairway has it for 88.
https://www.fairwayfordparts.net/oem...UHJvZHVjdHM%3D
https://www.fairwayfordparts.net/oem...UHJvZHVjdHM%3D







