Yea, just a thought. Taking out 3" might be a little too much from the looks of it. You were thinking about removing the body lift correct ?

 

Inconsiderate you are. Pointing out, you already trash one otherwise good thread with that stuff....no need to go for two.

 

Yeah, the BL was cool for a little while but I feel like it lowered the ride quality a little too. Now I'm trying to decide if I should go with oem Rubber or one of the prothane/poly bushing kits. I like the idea of cutting the blocks.

 

Not a body lift, but I added a 1" block in the back and raised the front to 24" hub to fender. It's subtle but noticeable, looks good, and the ride up front isn't too harsh. It should work with your 35's as well.

Pics here:
https://www.f150forum.com/f6/starting-over-2003-dsg-scab-355367/index2/#post4997524

 

I did that as well. Went with a B&D 3" block..swapped that with the factory 2" block.

 

I am about done with this.
Worry about your post's not mine.
Any other discussion on this will end up in a warning.

Just drop it.

 

Ok Cleaned up thread Please do not continue this thread with more back and forth just move on and put content towards the threads meaning please.

 

1st day in the 40s and the squirrels are out gathering nuts.
This little guy is pretty friendly.

 

There's a spot I like to go in the mountains where the little ground squirrels are practically tame. If you sit still, they will walk right up on your lap to see if you have a treat.

 

On the way back to the airport. LA is quite a 54!T hole.