Thinking
Smarter than most Racoons
Joined: Aug 2018
Posts: 2,426
Likes: 1,638
My answer did not meet my quality standards so I removed it so there would be no victim.
Also, Those arent M&Ms
These are:
One of my kids came by with an AC doesn't blow cold and asked if I could fix it.
That's the blower inlet. Yeah, I fixed it.
Last edited by ultimatenoobie; Aug 31, 2021 at 07:04 PM. Reason: https://escipub.com/Articles/IRJPH/IRJPH-2021-08-1005.pdf
98 F150 5.4L E40D/4R100
Joined: Nov 2006
Posts: 28,520
Likes: 7,632
From: MI
Somethings wrong here....there's more brown ones on the table. That's not like you.....is it?
I bet your kid noticed the leaves....just before thinking of you. Kids do that too.
Senior Member
Joined: Dec 2015
Posts: 23,192
Likes: 8,622
From: Utah
LOL.... yep, kids. Been trying to get mine to help clean up the house since I got home from work. Got tired of the storage room being a dumping point for whatever they don't want to look at in their rooms. And by dumping point, I mean the open the door, throw it in the way so nobody can now enter said storage room, and then shut the door.
Frankie gets no love tonight. But, the back of the F150 is full again.
Frankie gets no love tonight. But, the back of the F150 is full again.
Smarter than most Racoons
Joined: Aug 2018
Posts: 2,426
Likes: 1,638
Some of the non browns may have been consumed.
I don't think they saw the leaves. I had to remove the blower motor to see them. But yeah, their first thought was to call dad.
Now an XLT in Colorado
Joined: Aug 2016
Posts: 5,977
Likes: 3,171
From: Colorado
98 F150 5.4L E40D/4R100
Joined: Nov 2006
Posts: 28,520
Likes: 7,632
From: MI
Noobie, - that Forney MIG comes with a tweco gun. Good thing about that, you can use this spot weld nozzle for perfect butt joint welding (not spot welding), -
https://www.eastwood.com/spot-weld-n...=google&wv=3.1
The tabs maintain stick-out so there's no guessing. You clamp a guide on the piece your welding to run the nozzle against. For exhaust, you can uses a muffler clamp as a guide. It's like a big time cheat for those who can't see the puddle. Stick- out is key as it keeps the shielding gas where it's suppose to be. No contamination.
You won't find that info on the internet.
You can purchase sot weld nozzles for other guns, but tweco has the best one. You can customize it as well.
https://www.eastwood.com/spot-weld-n...=google&wv=3.1
The tabs maintain stick-out so there's no guessing. You clamp a guide on the piece your welding to run the nozzle against. For exhaust, you can uses a muffler clamp as a guide. It's like a big time cheat for those who can't see the puddle. Stick- out is key as it keeps the shielding gas where it's suppose to be. No contamination.
You won't find that info on the internet.
You can purchase sot weld nozzles for other guns, but tweco has the best one. You can customize it as well.
Smarter than most Racoons
Joined: Aug 2018
Posts: 2,426
Likes: 1,638
Noobie, - that Forney MIG comes with a tweco gun. Good thing about that, you can use this spot weld nozzle for perfect butt joint welding (not spot welding), -
https://www.eastwood.com/spot-weld-n...=google&wv=3.1
The tabs maintain stick-out so there's no guessing. You clamp a guide on the piece your welding to run the nozzle against. For exhaust, you can uses a muffler clamp as a guide. It's like a big time cheat for those who can't see the puddle. Stick- out is key as it keeps the shielding gas where it's suppose to be. No contamination.
You won't find that info on the internet.
You can purchase sot weld nozzles for other guns, but tweco has the best one. You can customize it as well.
https://www.eastwood.com/spot-weld-n...=google&wv=3.1
The tabs maintain stick-out so there's no guessing. You clamp a guide on the piece your welding to run the nozzle against. For exhaust, you can uses a muffler clamp as a guide. It's like a big time cheat for those who can't see the puddle. Stick- out is key as it keeps the shielding gas where it's suppose to be. No contamination.
You won't find that info on the internet.
You can purchase sot weld nozzles for other guns, but tweco has the best one. You can customize it as well.
That's really cool. Thanks for that heads up. That price is good too.
Yeah, I'm gonna get the Fourney. I can get it through our company supplier for $620 + tax. The company gets Miller but I ain't that Geico money man so no to Miller.
Senior Member
Joined: Dec 2015
Posts: 23,192
Likes: 8,622
From: Utah
Not too sure if I'll be able to get my stupid hatch done tonight on Frankie. I have a doc appointment.... I've got some kind of a tumor in my back, right below my right shoulder blade. Not too sure what's going to happen with it. I don't think it's anything serious, I've had it for a while, but it's starting to become uncomfortable.
Uggggh....
Uggggh....