The Leveling Kit Thread
#32
I was wanting to do a similar setup minus the 1" block on the rear. How does it ride with the leveling wheel and tire setup? Also I wanted to go with 20x10 -12mm mavericks and 33x12.5 Toyo MTs. Do you think I will be rubbing with that setup? I like a little offset, how far do yours stick out? Pictures would be great! Thanks!
I would think for sure you would have major rub issues. Mine are very minor with the mud flaps but your going 1" wider on the rim plus a more aggressive offset. I would be inclined to say you will have serious rubbing and issues unless of course your willing to cut the crash bars off......
Last edited by RDP 2015; 06-01-2015 at 04:58 PM.
The following 8 users liked this post by Anguishedmetal:
Bob Rotten (11-19-2023),
Brandon.duke240 (05-31-2018),
joe_mac (12-13-2023),
John Huff (12-08-2019),
JoshRubyF150 (03-05-2020),
and 3 others liked this post.
#34
Senior Member
My setup is RC 2.5" with a +1" rear block; very slight rake as a result.
The following users liked this post:
gregimusprime77 (12-04-2023)
#35
Below is a picture of my truck on a 2 inch auto spring and no rear block. I still have some rake to it. I think a 2.5 will set it level. I think if you are doing a rear block upgrade you should do 2.5 and plan on having rake.
Next this truck is getting a rear block upgrade and an icon stage 2 kit. So I will post pictures of the icon kit at the max (2.63 inches) of lift and our pro comp 3 inch rear block. But first we have to take the fox kit that is on it off road and make a video for you guys.
Next this truck is getting a rear block upgrade and an icon stage 2 kit. So I will post pictures of the icon kit at the max (2.63 inches) of lift and our pro comp 3 inch rear block. But first we have to take the fox kit that is on it off road and make a video for you guys.
Any updates on the icon stage 2 kit being installed? trying to decide if I wanna just do spacers in blocks vs coilovers....and if coilovers fox vs icon.
#36
As requested via PM
I would think for sure you would have major rub issues. Mine are very minor with the mud flaps but your going 1" wider on the rim plus a more aggressive offset. I would be inclined to say you will have serious rubbing and issues unless of course your willing to cut the crash bars off......
The following users liked this post:
Mike100385 (06-08-2019)
#37
Here is some good info on leveling kits and installs. First is the video of a 2 inch auto spring leveling kit. Then the install of a coil over leveling kit.
2014-2015 F-150 Auto Spring 2 Inch Front Leveling Kit Install - YouTube
2014-2015 F-150 FOX 2.0 Front Adjustable Coilovers Install - YouTube
Here are some pictures of our 2015 FX4 Ecoboost on 295-65-18s on stock rims.
2014-2015 F-150 Auto Spring 2 Inch Front Leveling Kit Install - YouTube
2014-2015 F-150 FOX 2.0 Front Adjustable Coilovers Install - YouTube
Here are some pictures of our 2015 FX4 Ecoboost on 295-65-18s on stock rims.
http://www.stage3motorsports.com/AS2...eling-Kit.html
It does not look the same.
Aslo is a Front End Alignment required?
#38
We are looking to have the Icon kit installed late this week or early next week. We will post all the same info about that kit. Install Video, Pictures, and ill go beat on it and do a review.
__________________
Joel
623.434.5277
Contact me for Forum pricing
Joel
623.434.5277
Contact me for Forum pricing
The following users liked this post:
cptCORNDOG813 (06-02-2015)
#39
Is the kit being installed in the video, this on?
http://www.stage3motorsports.com/AS2...eling-Kit.html
It does not look the same.
Aslo is a Front End Alignment required?
http://www.stage3motorsports.com/AS2...eling-Kit.html
It does not look the same.
Aslo is a Front End Alignment required?
__________________
Joel
623.434.5277
Contact me for Forum pricing
Joel
623.434.5277
Contact me for Forum pricing
The following users liked this post:
GOBLUEJD (06-02-2015)
The following 6 users liked this post by BlacknTan2:
JoeInPI (06-10-2019),
keithb (01-10-2018),
Liv'nbytheBungie74 (09-16-2018),
Mike100385 (06-08-2019),
Steevensi (11-13-2019),
and 1 others liked this post.