The Leveling Kit Thread
#21
2015 Ruby Red King Ranch
AFter 2.5" Rough Country level install. Front measures: 39.5(25.8 from hub), rear measures: 39.75(26 from hub) to fender. Also went with 15% window tint across the board.*
<br/><br/><br/>AFter 2.5" Rough Country level install. Front measures: 39.5(25.8 from hub), rear measures: 39.75(26 from hub) to fender. Also went with 15% window tint across the board.*
<br/><br/><br/>AFter 2.5" Rough Country level install. Front measures: 39.5(25.8 from hub), rear measures: 39.75(26 from hub) to fender. Also went with 15% window tint across the board.*
The following 19 users liked this post by Jason 2015:
100Pyatt (04-20-2024),
CKMCKENZIE79 (10-29-2019),
cltgt (08-14-2020),
Denver Johnson Jr (08-11-2019),
Don Pollack (02-20-2020),
and 14 others liked this post.
#22
AFter 2.5" Rough Country level install. Front measures: 39.5(25.8 from hub), rear measures: 39.75(26 from hub) to fender. Also went with 15% window tint across the board.*
<br/><br/><br/>AFter 2.5" Rough Country level install. Front measures: 39.5(25.8 from hub), rear measures: 39.75(26 from hub) to fender. Also went with 15% window tint across the board.*
<br/><br/><br/>AFter 2.5" Rough Country level install. Front measures: 39.5(25.8 from hub), rear measures: 39.75(26 from hub) to fender. Also went with 15% window tint across the board.*
Is this just a front kit or did you use the rear block also?
The following 5 users liked this post by Csetheridge:
100Pyatt (04-20-2024),
Freddy& (10-09-2021),
jesseh627 (05-31-2020),
spedometerjones (10-07-2020),
Wingman15 (10-16-2015)
The following users liked this post:
BB27 (06-04-2019)
#26
How are your trucks riding with the 2.5" front only? I have an XLT FX4 and would like it to be as perfectly level as possible, but don't want to compromise the ride...
The following users liked this post:
jsmith931 (06-23-2021)
#28
BDS 2.5"F 1"R
TOYO Open Country Extreme
295/60R20
Fuel Maverick 20x9 ET +1
Slight rub at full lock on rear crash bar only because of mudflap thickness.
Last edited by RDP 2015; 06-01-2015 at 05:01 PM.
The following 5 users liked this post by RDP 2015:
Bradpinkston (07-07-2020),
fordneuroguy (04-28-2020),
Mike100385 (06-08-2019),
spedometerjones (10-07-2020),
TheZarb (03-09-2019)
#29
I was wanting to do a similar setup minus the 1" block on the rear. How does it ride with the leveling wheel and tire setup? Also I wanted to go with 20x10 -12mm mavericks and 33x12.5 Toyo MTs. Do you think I will be rubbing with that setup? I like a little offset, how far do yours stick out? Pictures would be great! Thanks!
#30
Junior Member
Join Date: May 2015
Location: Waco, Texas
Posts: 19
Likes: 0
Received 0 Likes
on
0 Posts
Here is some good info on leveling kits and installs. First is the video of a 2 inch auto spring leveling kit. Then the install of a coil over leveling kit.
2014-2015 F-150 Auto Spring 2 Inch Front Leveling Kit Install - YouTube
2014-2015 F-150 FOX 2.0 Front Adjustable Coilovers Install - YouTube
Here are some pictures of our 2015 FX4 Ecoboost on 295-65-18s on stock rims.
2014-2015 F-150 Auto Spring 2 Inch Front Leveling Kit Install - YouTube
2014-2015 F-150 FOX 2.0 Front Adjustable Coilovers Install - YouTube
Here are some pictures of our 2015 FX4 Ecoboost on 295-65-18s on stock rims.
looks good, but sure looks like it could fit a taller tire