i removed the 3 inch leveling kit from RC and had a 4 inch lift installed.

 

looks good. curious, what made ya go with the 4" over the 6"?

 

I just had Bilstein 5100 installed on front and rear on my 2016 F150 4x4 at my local shop. I had 2 inches of rake to the front with the stock shocks. I had the installer set the front at 1.75" and now that I have the truck back the front is 3/4" higher then the rear. I have no idea why this is occurring. Thanks for any tips!

 

Did they take the rear blocks out?

 

No, they did not touch the leaf springs or factory block

 

Sounds like they set them at the wrong height.. Some little shops around me don't listen either.

 

What wheel spacers are you running? Did you even up having to trim any of the studs or do the wheels have pockets in the back of them?

 

Did they get the spring perch upside down? This could add a couple extra inches up front.

 

I went with these on amazon:
No trimming, they have a lip on the back of them that fit with the OEM rims I have perfectly.

 

Ok guys, My front struts should be in next week after waiting almost 4 weeks, went with the Ranchos quick strut.
next question looking to add a taller tire or to fill the well a bit more, as of right now I have the stock size 275/55/20 what the biggest I can go with out any rub or any mods the the body