Hints, Tips and Tricks
5 Year Member
Joined: Jul 2015
Posts: 5,684
Likes: 1,286
From: SE Michigain
Dunno about the rest of you, but my 73-year-old eyes ache from trying to read that manual! So I found a PDF copy of it (free) via Google search, downloaded it to my laptop, and used another free program called Calibre to load it into the Kindle app on my tablet. Had to play with it a little, nothing fancy, but it now works fine.
One of the neater functions of this is that I can increase the font size so I can read it!
Same thing works for Nook and other e-readers.
Then I got to wondering -- I never checked to see if something like that already existed.
O well, it works well for me!
One of the neater functions of this is that I can increase the font size so I can read it!
Same thing works for Nook and other e-readers.
Then I got to wondering -- I never checked to see if something like that already existed.
O well, it works well for me!
I'm pretty sure there is no light in the dash either. I could disable the chime in my Toyota but it always kept the red seatbelt light on the dash.
Senior Member
Joined: Aug 2015
Posts: 1,148
Likes: 157
From: Richmond, Tx
pg 40-41
Read Steps 1 - 4 thoroughly before
proceeding with the programming
procedure.
Before following the procedure, make sure
that:
• The parking brake is set.
• The transmission is in park (P).
• The ignition is off.
• The driver and front passenger safety
belt is unbuckled.
1. Switch the ignition on. Do not start the
engine.
2. Wait until the safety belt warning light
turns off (about one minute). After
Step 2, wait an additional 5 seconds
before proceeding with Step 3. Once
you start Step 3, you must complete
the procedure within 30 seconds
3. For the seating position you are
switching off, buckle then unbuckle the
safety belt three times at a moderate
speed, ending in the unbuckled state.
After Step 3, the safety belt warning
light turns on.
4. While the safety belt warning light is
on, buckle then unbuckle the safety
belt. After Step 4, the safety belt
warning light flashes for confirmation.
• This will switch the feature off for that
seating position if it is currently on.
• This will switch the feature on for that
seating position if it is currently off.
Senior Member
Joined: Apr 2015
Posts: 417
Likes: 68
Thanks for the clarification, on it!
5 Year Member
Joined: Jul 2015
Posts: 139
Likes: 21
From: Boston, MA
Any way to turn off the double honk of the horn when I leave the running truck with the key in my pocket? Neighbors love it when I forget the key is in my pocket and I run back in the house at 6 A.M.
Member
Joined: Aug 2015
Posts: 47
Likes: 8
I'm sure someone has the pg number of the manual but I remember seeing it in there. I can't do that on mine or I'd wind up leaving it running at work accidentally. Haha
Senior Member
Joined: Aug 2015
Posts: 1,148
Likes: 157
From: Richmond, Tx