FORScan - software to enable/disable features in your truck
#8411
The FORScan Guy
Thread Starter
Has else noticed the Motorcraft As Built site only gives you 300 lines of data and then stops? I'm trying to compare two identical trucks, except one has BLIS and one doesnt. Because the truck with BLIS has more lines of data, the Motorcraft site cuts off halfway through the PDM and doesnt show the ABS or TRM modules. Are there any other options to download the as built data?
#8412
Senior Member
iTrader: (1)
My goal is to add BLIS to my 2016 XLT. I already have the BLIS mirrors, Door Modules, Taillights and Sensors from doing other mods, so I think all I'm missing at this point is wiring and programming. Before I invest time in chasing down wiring diagrams I wanted to compare the as-built data to see how many things will needed to be changed. So far, it looks like there are 16 lines that would need to be changed, not including programming the sensors themselves.
#8413
#8414
The FORScan Guy
Thread Starter
My goal is to add BLIS to my 2016 XLT. I already have the BLIS mirrors, Door Modules, Taillights and Sensors from doing other mods, so I think all I'm missing at this point is wiring and programming. Before I invest time in chasing down wiring diagrams I wanted to compare the as-built data to see how many things will needed to be changed. So far, it looks like there are 16 lines that would need to be changed, not including programming the sensors themselves.
In DDM/PDM you need one of the following:
740/41-04-01 F4xx xx Turn Signals, Puddle Lamps & BLIS
740/41-04-01 74xx xx Turn Signals & BLIS - without Puddle Lamps
In IPC you need:
720-03-01 6xxx xxxx xxxx - BLIS enabled
720-01-01 xxxx xxxx 7xxx - CTA enabled
SODL/SODR:
7C4/7C6-01-01 xxx2 xxxx - BLIS/CTA enabled
7C4/7C6-05-01 xxxx xxxx x0xx - Blockage enabled
Good luck and pm me if you need any help
Last edited by Livnitup; 05-10-2017 at 01:53 PM.
#8415
Tommy
iTrader: (3)
Join Date: Nov 2012
Location: Greenville, North Carolina
Posts: 6,022
Received 4,265 Likes
on
2,183 Posts
Off the top of my head you need changes in DDM/PDM, IPC, SODL/SODR
In DDM/PDM you need one of the following:
740/41-04-01 F4xx xx Turn Signals, Puddle Lamps & BLIS
740/41-04-01 74xx xx Turn Signals & BLIS - without Puddle Lamps
In IPC you need:
720-03-01 6xxx xxxx xxxx - BLIS enabled
720-01-01 xxxx xxxx 7xxx - CTA enabled
SODL/SODR:
7C4/7C6-01-01 xxx2 xxxx - BLIS/CTA enabled
7C4/7C6-05-01 xxxx xxxx x0xx - Blockage enabled
Good luck and pm me if you need any help
In DDM/PDM you need one of the following:
740/41-04-01 F4xx xx Turn Signals, Puddle Lamps & BLIS
740/41-04-01 74xx xx Turn Signals & BLIS - without Puddle Lamps
In IPC you need:
720-03-01 6xxx xxxx xxxx - BLIS enabled
720-01-01 xxxx xxxx 7xxx - CTA enabled
SODL/SODR:
7C4/7C6-01-01 xxx2 xxxx - BLIS/CTA enabled
7C4/7C6-05-01 xxxx xxxx x0xx - Blockage enabled
Good luck and pm me if you need any help
Last edited by Firerunner; 05-10-2017 at 02:21 PM.
#8416
The FORScan Guy
Thread Starter
Manual says the radar sensors are behind the bumper fascia. I was always under the impression they were integrated into the read tail light assemblies.
Last edited by Livnitup; 05-10-2017 at 02:25 PM.
#8417
Tommy
iTrader: (3)
Join Date: Nov 2012
Location: Greenville, North Carolina
Posts: 6,022
Received 4,265 Likes
on
2,183 Posts
front bumper?
#8418
The FORScan Guy
Thread Starter
#8419
Tommy
iTrader: (3)
Join Date: Nov 2012
Location: Greenville, North Carolina
Posts: 6,022
Received 4,265 Likes
on
2,183 Posts
#8420
The FORScan Guy
Thread Starter
The following users liked this post:
Firerunner (05-10-2017)