FORScan - software to enable/disable features in your truck
 

Updated 1/9/19:

For a tutorial on getting started with FORScan, please follow the link below:

https://docs.google.com/document/d/1...it?usp=sharing

Thanks for this. I have read the other threads and have been trying to get a good idea of how it works. I am not computer illiterate but I am no expert either so I did not just want to go messing around with the truck and screw something up. Hopefully someone can post a "FORScan for dummies" and give a step by step on setup and usage. I know the information may be in the other threads but they tend to bounce on and off topic quite a bit.

I actively working on the first post now to hopefully answer most of these questions :thumbsup:

Your effort is appreciated!
PM LaMartian and have him make this thread a sticky.

no need to PM... I am everywhere

That was freaky quick. Much obliged bro.

:thumbsup:

Ok, the original post is semi-done for now. If anyone thinks anything needs to be clarified or other things added that I may have forgot, please reply

I would like to add also. If you use an extension cable like this:

https://www.amazon.com/gp/product/B01C2M2ZZG/

With the MXBT you will not get all the modules to pull up. I was scratching my head several times because I could not get it to work properly. After I connected the MXBT direct to the OBDII port everything worked great.

Just FYI



.

It would be wonderful if Ford setup Sync (or Sync 3) to be able to change these features!