FORScan - software to enable/disable features in your truck
05-09-2017, 10:40 PM
#8401
726-26-02: x1xx xxxx xxxx
726-45-01: xxxx 7Fxx xxxx
726-50-01: 02xx
Any idea what the original values were so that I can try and manually reverse these changes? I should've taken photos, but assumed my backup files would load. Any help would be greatly appreciated!!!
Have a 2016 Lariat Roush F150
05-09-2017, 10:44 PM
#8402
The FORScan Guy
Thread Starter
I changed the following initially under BCM and still have the interior lights remaining on:
726-26-02: x1xx xxxx xxxx
726-45-01: xxxx 7Fxx xxxx
726-50-01: 02xx
Any idea what the original values were so that I can try and manually reverse these changes? I should've taken photos, but assumed my backup files would load. Any help would be greatly appreciated!!!
Have a 2016 Lariat Roush F150
726-26-02: x1xx xxxx xxxx
726-45-01: xxxx 7Fxx xxxx
726-50-01: 02xx
Any idea what the original values were so that I can try and manually reverse these changes? I should've taken photos, but assumed my backup files would load. Any help would be greatly appreciated!!!
Have a 2016 Lariat Roush F150
726-45-01: xxxx 11xx xxxx
726-50-01: 10xx
The following users liked this post:
uncc03 (05-09-2017)
05-09-2017, 11:06 PM
#8403
05-09-2017, 11:29 PM
#8404
Has anyone tapped into these leads to confirm this? Also, are there wires/pins in those ports currently? And where is this BCM module located? I'm looking to tap these to indicate the f150 is not in park, and therefore should enable the front parking sensors. Figured if these are sending 12v I could use it to trip a relay to engage the sensors.
05-09-2017, 11:58 PM
#8405
I always took control of mine right away,,, not waiting for them to stop..
Secret I'm sure is in the memory button and shifter location.
Hardest part is after you happen to get the drivers side working........remembering the secret for the passenger side..
Good news is once you get them working right they work great,,, very handy for me..
Secret I'm sure is in the memory button and shifter location.
Hardest part is after you happen to get the drivers side working........remembering the secret for the passenger side..
Good news is once you get them working right they work great,,, very handy for me..
05-10-2017, 07:32 AM
#8406
Senior Member
Has anyone tapped into these leads to confirm this? Also, are there wires/pins in those ports currently? And where is this BCM module located? I'm looking to tap these to indicate the f150 is not in park, and therefore should enable the front parking sensors. Figured if these are sending 12v I could use it to trip a relay to engage the sensors.
https://www.f150forum.com/f118/setti...380225/index7/
Livnitup confirmed that these are pinned (36 & 40) at the BCM. I posted a diagram showing the BCM and connector location. I am interested in finding these also, but have not had time yet.
The following users liked this post:
enigy (05-10-2017)
05-10-2017, 08:19 AM
#8407
See post 67 through 69 here:
https://www.f150forum.com/f118/setti...380225/index7/
Livnitup confirmed that these are pinned (36 & 40) at the BCM. I posted a diagram showing the BCM and connector location. I am interested in finding these also, but have not had time yet.
https://www.f150forum.com/f118/setti...380225/index7/
Livnitup confirmed that these are pinned (36 & 40) at the BCM. I posted a diagram showing the BCM and connector location. I am interested in finding these also, but have not had time yet.
05-10-2017, 08:21 AM
#8408
My Canadian market truck has an as built value of 108E for 726-50-01. According to the above, that should equate to light bars etc. However my truck uses the low beams as DRLs with this setting.
Does this mean the pin out setting includes whatever was previously selected as DRLs?
Does this mean the pin out setting includes whatever was previously selected as DRLs?
05-10-2017, 12:26 PM
#8410
Has else noticed the Motorcraft As Built site only gives you 300 lines of data and then stops? I'm trying to compare two identical trucks, except one has BLIS and one doesnt. Because the truck with BLIS has more lines of data, the Motorcraft site cuts off halfway through the PDM and doesnt show the ABS or TRM modules. Are there any other options to download the as built data?