FORScan - software to enable/disable features in your truck
#1062
Will be getting a modified ELM327 soon and today thought of something I would like to change.
When you momentarily push the turn signal stalk to change lanes there are only 3 flashes of the turn signal ~ 2 seconds. I would like to increase this to about 5 seconds to allow complete lane change before the signal goes off.
Any idea where this might be located or if it can be changed using FORScan?
Thanks, CaptZap
When you momentarily push the turn signal stalk to change lanes there are only 3 flashes of the turn signal ~ 2 seconds. I would like to increase this to about 5 seconds to allow complete lane change before the signal goes off.
Any idea where this might be located or if it can be changed using FORScan?
Thanks, CaptZap
#1063
The FORScan Guy
Thread Starter
Will be getting a modified ELM327 soon and today thought of something I would like to change.
When you momentarily push the turn signal stalk to change lanes there are only 3 flashes of the turn signal ~ 2 seconds. I would like to increase this to about 5 seconds to allow complete lane change before the signal goes off.
Any idea where this might be located or if it can be changed using FORScan?
Thanks, CaptZap
When you momentarily push the turn signal stalk to change lanes there are only 3 flashes of the turn signal ~ 2 seconds. I would like to increase this to about 5 seconds to allow complete lane change before the signal goes off.
Any idea where this might be located or if it can be changed using FORScan?
Thanks, CaptZap
#1066
Senior Member
Will be getting a modified ELM327 soon and today thought of something I would like to change.
When you momentarily push the turn signal stalk to change lanes there are only 3 flashes of the turn signal ~ 2 seconds. I would like to increase this to about 5 seconds to allow complete lane change before the signal goes off.
Any idea where this might be located or if it can be changed using FORScan?
Thanks, CaptZap
When you momentarily push the turn signal stalk to change lanes there are only 3 flashes of the turn signal ~ 2 seconds. I would like to increase this to about 5 seconds to allow complete lane change before the signal goes off.
Any idea where this might be located or if it can be changed using FORScan?
Thanks, CaptZap
#1067
The FORScan Guy
Thread Starter
The following 3 users liked this post by Livnitup:
#1068
The FORScan Guy
Thread Starter
If it matters to anyone, BCM 726-40-01 is Front/Rear Placard Tire Pressure.
726-40-01 xxxx ABCD xxxx AB=Front Tire pressure converted to hex, CD=Rear Tire pressure converted to hex
Example: 726-40-01 xxxx 2323 xxxx - Front 35/Rear 35
726-40-01 xxxx ABCD xxxx AB=Front Tire pressure converted to hex, CD=Rear Tire pressure converted to hex
Example: 726-40-01 xxxx 2323 xxxx - Front 35/Rear 35
#1069
LONG TIME FORD GUY
probably don't want to change those but is good to know what they are. Are you working the BCM now?
#1070
LONG TIME FORD GUY
Dude... if you spent a little time reading this thread ( like all of it) I would think you would notice that when L-up ( or anyone else for that matter) finds something, you will see the they post it. I know you are a new guy but you think he wouldn't post it? Sheesh