When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
My suggestions are to perhaps add notes here to indicate whether:
1) The vehicle is in Park or Drive
2) If Canadian / American DRLs are enabled in the IPC.
3) If you test under daylight or night time conditions (ambient light sensor conditions).
Because you just know someone will post about it not working, lol.
Last edited by Airborne_Ape; 09-18-2017 at 07:02 PM.
No problem. Ok, we need a volunteer who has stock Halogen front & rears with DRLs who can use the values on the new spreadsheet and take some pics and email them to me. Again, because this spreadsheet is still in the rough draft stage you may (probably will) be called on to volunteer with additional pics for other values as well.
I'm in a rental Chevy, otherwise I'd be all over this. It's too bad Ford employees aren't allowed to post here because there are a lot of Ford sales personnel out there who I know read this daily, use you work to cut costs, and could easily contribute something back
Last edited by Airborne_Ape; 09-18-2017 at 07:12 PM.
I used an app called GIPHY CAM for the animated turn signals
Love it - Awesome work Livn, your Forscan passion continues to shine!
If you don't get any volunteers for the 3rd Party LEDs (e.g. Anzo's), let me know and I will try and contribute. It will just be a few weeks out with my current schedule.
Love it - Awesome work Livn, your Forscan passion continues to shine!
If you don't get any volunteers for the 3rd Party LEDs (e.g. Anzo's), let me know and I will try and contribute. It will just be a few weeks out with my current schedule.
In the process of posting some images from CarrierJ now but thanks for the offer!
Did I read in this thread somewhere there was a utility that would create abt files from an as-built? No luck finding (I may not be using the correct search words either).
Did I read in this thread somewhere there was a utility that would create abt files from an as-built? No luck finding (I may not be using the correct search words either).
You are correct - flsdiver created a piece of software that you can compare asbuilt data & create .abt files
09-18-2017, 06:14 PM
You never cease to amaze!
