Just be aware that if you have heated seats they probably will not work after the bezel is swapped. I'm not sure anyone has overcome that issue.

I didn't have heated seats so it wasn't a problem.

Other then that, it's easy and very useful mod, I use all the time.

Mike

 

No heated seats on mine either, so I'm not worried about that!

 

For others that have done this mod, does the set temperature show on your home screen (like in the enclosed photo)?

On mine, it doesn't show on the home screen, temp is shown only on the climate screen.

The set temp is supposed to show in the upper left corner of the home screen. If dual mode is in use, the passenger side set temp is supposed to be shown in the upper right corner of the home screen. Any idea how to get this show on the home screen? Maybe a forscan setting?

 

Yes that would be a forscan change. Dual climate on

 

Maybe you, or someone else can point me to the right forscan setting(s) to enable this?

 

Leaf-Peeper Change 7D0-04-01-xxxx-xxx2-xxxx for the temp to show on the home screen

 

Thanks Firerunner, I gave that setting a try... but it didn't work. I've reverted back to what I had, the enclosed snapshot are my current APIM settings..

 

They do, you need the correct programming. Everything worked on mine when I did the upgrade, including fan controls from the touchscreen

 

I still haven't figured out how you have got the heated seats to work. Even with your codes mine wouldn't come on.....everything else does work though

 

Try changing it to 7D0-04-01-xxxx-xxx0-xxxx

0 is the bit for Climate Control Repeater for Dual Climate Control whereas 2 is the CCR for Single Climate Control (this is what I used in my truck) your bit "3" is the disable CCR setting