When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Turns out there was nothing wrong with my new steering wheel switch after all. Problem was with the SCCM configuration I was using:
724-03-01 19** **** ** ACC Cruise Stop & Go (Didn't work for me, go figure)
724-03-01 12** **** ** Ford ACC Cruise (This resolved my issue and still allowed for Stop & Go)
For ABS, I only had to purchase the ABS EU module - not the whole ABS system. I purchased a 2 day FJDS license to install the new ABS module.
Here is a breakdown of the parts I purchased:
what hardware did you use for the ABS module install? Thanks
I have a 2017 Platinum with ACC. Obviously it's not Stop & Go ACC, is it possible to retrofit S&G ACC to my truck? I'm OK with it as is, mostly curious to find out if it's even possible, or if it is, if it's easily possible.
Thank you everyone on this thread for your research and input. I am building up the courage to do this mod.
mbrick - thanks for the detail on engineering part numbers. This gives me confidence when purchasing that I get the correct part.
I have just completed a successful install of the components to have working adaptive cruise control stop and go on my 2018 502a with technology package f150. I previously had lane keep assist and after the ACC stop and go upgrade, the same lane keep assist is present. Has anyone successfully enabled Lane CENTER Assist after this upgrade so the truck will actively stay in the center of the lane and not play pinball with the road lines?
I have just completed a successful install of the components to have working adaptive cruise control stop and go on my 2018 502a with technology package f150. I previously had lane keep assist and after the ACC stop and go upgrade, the same lane keep assist is present. Has anyone successfully enabled Lane CENTER Assist after this upgrade so the truck will actively stay in the center of the lane and not play pinball with the road lines?
Not possible in this generation of trucks. If you really want lane centering you will need to buy a 2021+.
I have a 2017 Platinum with ACC. Obviously it's not Stop & Go ACC, is it possible to retrofit S&G ACC to my truck? I'm OK with it as is, mostly curious to find out if it's even possible, or if it is, if it's easily possible.
Same Question -- Can the Stop & Go be retrofitted in earlier years, like the 2016-2017 ?
