.....

 

18

 

.....

 

So, This thread is extremely helpful. ACC with CADS with Stop&Go are the only feature not on my 2018 Lariat FX4 w/LKA I think I have the entire parts list for the install I want to double check and make sure I have everything. Also, I was reading some older posts that was saying forscan does not have the capability to calibrate the sensors but I believe it does now. can someone please confirm that is the case, and I have all the parts in my cart to do this mod?

 

just finished installation, I would like to thank everyone for the helpful informations.
I have tested acc it is working fine, but stop and go is not working.
my car is 2018 lariat with 502 and there is no DTC

one thing I have noticed when changing FORScan in IPMA 706-01-01 last two digits is F8 instead of 77
I can't change it to XXXX AXXX 6977, it changed to 0905 A9C9 69F8

 

update: after short drive it works perfectly now, with stop and go
really wish I did this mod earlier.
thanks again for everybody

 

Out of curiosioty what did you use to program the new ABS? Did you do it yourself with the license or does Forscan now allow this to be done?

 

Yes I did it my self with FJDS two days license using VCX nano

 

I am wondering, I have a 2016 Lariat build 501a. Can this be added?

 

For reprogramming the ABS module with FJDS, what type of cable is required? I see it requires a J2534 cable but I don't know if this is the same protocol that OBDLink uses.
Can I use an OBDLink Ex?
Also have a Mini VCI for Toyotas, that might be compatible?

Also, the IMPA installed for LKA still needs to be replaced to add ACC?

Seems not a lot of recent updates on this thread so I am wondering if there were any new developments in the parts list needed.