2018: Adding Adaptive Cruise Control
5 Year Member
Joined: Mar 2018
Posts: 1,999
Likes: 682
I don't know what the acronym means, but it is Factory Ford service software:
https://www.fordtechservice.dealerco...wal_Latest.asp
https://www.fordtechservice.dealerco...wal_Latest.asp
5 Year Member
Joined: Mar 2018
Posts: 1,999
Likes: 682
2018 F-150 Lead Foot Lariat Special Edition With 502a package.
Here are the parts I used.
CADS - H1BZ-9E731-AE. Will still be called CCM in FORScan.
CADS Bracket- JL3Z-14C022-A
Bolts - W505424-S900 - 4ea Nutplates - W520802-S900 - 4ea
Bumper Wire Harness -JL3Z-15K867-G. May need different one for your truck. My truck is the eco boost with LED fog lights.
Wire Harness from Bumper Harness to CADS - JL3Z-15K867-B
Mount bracket studs - W717467-S439 (2 ea) and W717468-S439 (1 ea)
Sensor stud nuts – W705817-S441 (3ea)
HUD trim - FL3Z-15043C54-BA
HUD - FL3Z-19G468-A
Steering wheel sw - JL3Z-9C888-FA
IPMA - H1BZ-9E731-AE. Hope you have the old IPMA installed for Lane Keeping.
ABS Control Unit - JL3Z-2C215-B before 02/25/2018. After 02/26/2018 JL3Z-2C215-D. But you only need the ABS Control Module. So if you can find the P/N for only it.
Here are the parts I used.
CADS - H1BZ-9E731-AE. Will still be called CCM in FORScan.
CADS Bracket- JL3Z-14C022-A
Bolts - W505424-S900 - 4ea Nutplates - W520802-S900 - 4ea
Bumper Wire Harness -JL3Z-15K867-G. May need different one for your truck. My truck is the eco boost with LED fog lights.
Wire Harness from Bumper Harness to CADS - JL3Z-15K867-B
Mount bracket studs - W717467-S439 (2 ea) and W717468-S439 (1 ea)
Sensor stud nuts – W705817-S441 (3ea)
HUD trim - FL3Z-15043C54-BA
HUD - FL3Z-19G468-A
Steering wheel sw - JL3Z-9C888-FA
IPMA - H1BZ-9E731-AE. Hope you have the old IPMA installed for Lane Keeping.
ABS Control Unit - JL3Z-2C215-B before 02/25/2018. After 02/26/2018 JL3Z-2C215-D. But you only need the ABS Control Module. So if you can find the P/N for only it.
For example the ABS unit JL3Z-2C215-B is showing as discontinued and replaced by JL3Z-2C215-F. $1,039.
And the CADS module H1BZ-9E731-AE replaced by H1BZ-9E731-F. $507.
And IMPA JL3Z-19G490-H replaced by JL3Z-19G490-K. $262.
Prices have also increased substantially.
Can I find used parts from a 2018 with ACC from a junkyard or is the ABS module, IMPA, etc a single time programming part?
Last edited by mbrick; Jul 26, 2021 at 05:07 PM.
Junior Member
Joined: Apr 2019
Posts: 13
Likes: 3
I have added ACC for my 2018 502a, it was working perfect for couple of months with stop and go feature, and I really love it.
recently I have strange issue that happens some times, after pressing resume to go from complete stop, it stays on 1st gear and wont shift to second or third gear until redline or I press gas pedal.
I did checked there is no codes, did re align the sensor, disconnect the battery with no luck.
if any body have any idea why this happens please let me know.
recently I have strange issue that happens some times, after pressing resume to go from complete stop, it stays on 1st gear and wont shift to second or third gear until redline or I press gas pedal.
I did checked there is no codes, did re align the sensor, disconnect the battery with no luck.
if any body have any idea why this happens please let me know.
Senior Member
Joined: Dec 2019
Posts: 150
Likes: 41
From: Alabama
Ok is the complete list again with the correction to the IPMA part number.
2018 F-150 Lead Foot Lariat Special Edition With 502a package.
Here are the parts I used.
CADS - H1BZ-9E731-AE. Will still be called CCM in FORScan.
CADS Bracket- JL3Z-14C022-A
Bolts - W505424-S900 - 4ea Nutplates - W520802-S900 - 4ea
Bumper Wire Harness -JL3Z-15K867-G. May need different one for your truck. My truck is the eco boost with LED fog lights.
Wire Harness from Bumper Harness to CADS - JL3Z-15K867-B
Mount bracket studs - W717467-S439 (2 ea) and W717468-S439 (1 ea)
Sensor stud nuts – W705817-S441 (3ea)
HUD trim - FL3Z-15043C54-BA
HUD - FL3Z-19G468-A
Steering wheel sw - JL3Z-9C888-FA
IPMA - JL3Z-19G490-H. Hope you have the old IPMA installed for Lane Keeping.
ABS Control Unit - JL3Z-2C215-B before 02/25/2018. After 02/26/2018 JL3Z-2C215-D. But you only need the ABS Control Module. So if you can find the P/N for only it. But check your build date to see which one you need.
.
2018 F-150 Lead Foot Lariat Special Edition With 502a package.
Here are the parts I used.
CADS - H1BZ-9E731-AE. Will still be called CCM in FORScan.
CADS Bracket- JL3Z-14C022-A
Bolts - W505424-S900 - 4ea Nutplates - W520802-S900 - 4ea
Bumper Wire Harness -JL3Z-15K867-G. May need different one for your truck. My truck is the eco boost with LED fog lights.
Wire Harness from Bumper Harness to CADS - JL3Z-15K867-B
Mount bracket studs - W717467-S439 (2 ea) and W717468-S439 (1 ea)
Sensor stud nuts – W705817-S441 (3ea)
HUD trim - FL3Z-15043C54-BA
HUD - FL3Z-19G468-A
Steering wheel sw - JL3Z-9C888-FA
IPMA - JL3Z-19G490-H. Hope you have the old IPMA installed for Lane Keeping.
ABS Control Unit - JL3Z-2C215-B before 02/25/2018. After 02/26/2018 JL3Z-2C215-D. But you only need the ABS Control Module. So if you can find the P/N for only it. But check your build date to see which one you need.
.
I do not have a forward facing camera at all. Is the part number above an assembly with housing which makes everything flush with the windshield, or would I have more plastic bits to buy?
The bumper harness. I do not have LED fogs, nor the parking sensors up front - should I be looking for a different harness?
Senior Member
Joined: Apr 2021
Posts: 202
Likes: 129
My truck is a 2019 but it should be similar if not the same, though I will let others correct me if I'm wrong.
For the IPMA, if you don't have one at all (I would double check) then you would also need a new windshield and not just the module. As for what's included, the JL3Z-19G490-H is just the camera module itself and does not include the housing. As far as the bumper harness goes, my 302A doesn't have LEDs or parking sensors upfront and the JL3Z-15K867-G harness worked for me just fine.
For the IPMA, if you don't have one at all (I would double check) then you would also need a new windshield and not just the module. As for what's included, the JL3Z-19G490-H is just the camera module itself and does not include the housing. As far as the bumper harness goes, my 302A doesn't have LEDs or parking sensors upfront and the JL3Z-15K867-G harness worked for me just fine.
Senior Member
Joined: Dec 2019
Posts: 150
Likes: 41
From: Alabama
My truck is a 2019 but it should be similar if not the same, though I will let others correct me if I'm wrong.
For the IPMA, if you don't have one at all (I would double check) then you would also need a new windshield and not just the module. As for what's included, the JL3Z-19G490-H is just the camera module itself and does not include the housing. As far as the bumper harness goes, my 302A doesn't have LEDs or parking sensors upfront and the JL3Z-15K867-G harness worked for me just fine.
For the IPMA, if you don't have one at all (I would double check) then you would also need a new windshield and not just the module. As for what's included, the JL3Z-19G490-H is just the camera module itself and does not include the housing. As far as the bumper harness goes, my 302A doesn't have LEDs or parking sensors upfront and the JL3Z-15K867-G harness worked for me just fine.
Good deal, thanks.
I had my friend who has the camera send me the pictures of his assembly. I see what I need.
Still though, as to the windshield - has anyone swapped, and if so, what is the difference besides the graphics at the top?
Senior Member
Joined: Apr 2021
Posts: 202
Likes: 129
For me, I wouldn't have added ACC if I had to replace the windshield. From what I understand, the need for a new windshield is because of the textured graphic... Or whatever it is that is on the windshield at the base of the mirror which would interfere with the camera.
5 Year Member
Joined: Mar 2018
Posts: 1,999
Likes: 682
Which parts on this list can be substituted?
For example the ABS unit JL3Z-2C215-B is showing as discontinued and replaced by JL3Z-2C215-F. $1,039.
And the CADS module H1BZ-9E731-AE replaced by H1BZ-9E731-F. $507.
And IMPA JL3Z-19G490-H replaced by JL3Z-19G490-K. $262.
Prices have also increased substantially.
Can I find used parts from a 2018 with ACC from a junkyard or is the ABS module, IMPA, etc a single time programming part?
For example the ABS unit JL3Z-2C215-B is showing as discontinued and replaced by JL3Z-2C215-F. $1,039.
And the CADS module H1BZ-9E731-AE replaced by H1BZ-9E731-F. $507.
And IMPA JL3Z-19G490-H replaced by JL3Z-19G490-K. $262.
Prices have also increased substantially.
Can I find used parts from a 2018 with ACC from a junkyard or is the ABS module, IMPA, etc a single time programming part?
