Suggestion for lights?
#1
Senior Member
Thread Starter
Suggestion for lights?
2017 Lariat with Halogen lights. I’m confused about which sea light model is ideal for both the low and high beams. Can someone recommend an exact model which works well and provide a link?
Also, looking to go LED for the cargo and license plate lights. Any good recommendation here as well?
thank you
Also, looking to go LED for the cargo and license plate lights. Any good recommendation here as well?
thank you
#2
Senior Member
#3
I just installed Sealight S2s for fog, low and high. I am pleased with them. I bought extended dust caps from Amazon just for the extra room, you can make stock covers work
#4
Stick with the same model all around. ZERO reason not to. Not sure why you'd even mix models. Order these up and be done. Love mine. Simple plug and play, zero issues with cut off, and just flat out work.
https://www.amazon.com/H11-9005-HB3-...ve%2C94&sr=1-4
Driving lights...
https://www.amazon.com/Headlight-SEA...e%2C94&sr=1-10
https://www.amazon.com/H11-9005-HB3-...ve%2C94&sr=1-4
Driving lights...
https://www.amazon.com/Headlight-SEA...e%2C94&sr=1-10
#5
Senior Member
Thread Starter
Stick with the same model all around. ZERO reason not to. Not sure why you'd even mix models. Order these up and be done. Love mine. Simple plug and play, zero issues with cut off, and just flat out work.
https://www.amazon.com/H11-9005-HB3-...ve%2C94&sr=1-4
Driving lights...
https://www.amazon.com/Headlight-SEA...e%2C94&sr=1-10
https://www.amazon.com/H11-9005-HB3-...ve%2C94&sr=1-4
Driving lights...
https://www.amazon.com/Headlight-SEA...e%2C94&sr=1-10
The following users liked this post:
JW3 (01-19-2022)
#6
My 2 cents (I just installed the same). Factory dust covers will fit, I originally put mine back on. The wiring etc will coil inside just fine. However, I did that and then got to thinking and decided that, knowing these get hot, I wanted a bit more air space for cooling and also to keep the wires away from anything hot. I ordered some extended covers from Amazon, pulled the wires out a bit and put the extended covers on
The following users liked this post:
JW3 (01-19-2022)
#7
Senior Member
Thread Starter
My 2 cents (I just installed the same). Factory dust covers will fit, I originally put mine back on. The wiring etc will coil inside just fine. However, I did that and then got to thinking and decided that, knowing these get hot, I wanted a bit more air space for cooling and also to keep the wires away from anything hot. I ordered some extended covers from Amazon, pulled the wires out a bit and put the extended covers on
Trending Topics
#9
The following users liked this post:
JW3 (01-19-2022)
#10
Senior Member
The following users liked this post:
BlueJean15 (01-19-2022)