Topic Sponsor
1997 - 2003 Ford F150 General discussion on the Ford 1997 - 2003 F150 truck.

What would you do?????

Thread Tools
 
Search this Thread
 
Old Feb 9, 2015 | 09:01 PM
  #1  
99f1504x4.'s Avatar
Thread Starter
Junior Member
 
Joined: Jul 2014
Posts: 178
Likes: 1
From: Houston
Default What would you do?????

My trucks engine is gone it either needs a rebuild or replacement. Well i dont know if my truck is even worth it anymore. I originally bought it for 2300 last june and well it has quite a bit of rust on the undercarraige, cab borners and inside the bed. Sometimes i think i need newer truck like a f150 2004-2005 model. But i dont think i can afford another truck payment. What would yall do?
Reply
Old Feb 9, 2015 | 09:07 PM
  #2  
rcruz3568's Avatar
Senior Member
 
Joined: Jan 2012
Posts: 2,062
Likes: 53
From: Corinth,MS
Default

Originally Posted by 99f1504x4.
My trucks engine is gone it either needs a rebuild or replacement. Well i dont know if my truck is even worth it anymore. I originally bought it for 2300 last june and well it has quite a bit of rust on the undercarraige, cab borners and inside the bed. Sometimes i think i need newer truck like a f150 2004-2005 model. But i dont think i can afford another truck payment. What would yall do?
id find a used motor and drop in it... As I just did the same with mine. 800 is what I gave for my motor.
Reply
Old Feb 9, 2015 | 09:19 PM
  #3  
Tackle's Avatar
Title
 
Joined: Sep 2012
Posts: 6,672
Likes: 499
From: USA
Default

Scrap er. Doesn't sound like it's in good shape.
Reply
Old Feb 9, 2015 | 10:10 PM
  #4  
Red-Ford's Avatar
5 Year Member
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Jul 2014
Posts: 3,565
Likes: 287
From: Everett, WA
Default

IDK how your financials are, but if you can score a deal like rcurz, I would put a new engine in it. If you do buy a different truck make sure you know what the common problems are on them and how to check them. For example the 04-08's had a bad design to get oil to the cam phasers so they go out costing you a couple grand.
Reply
Old Feb 10, 2015 | 02:14 AM
  #5  
johnnycf26's Avatar
Senior Member
 
Joined: Sep 2013
Posts: 196
Likes: 10
From: Yakima WA
Default

I just picked up a 5.4 out of a rolled rig with 127K on the clock for $600. 165 compression in all cylinders. You could look for something like that. But I'm kind of with Tackle, sounds like the condition of the truck may not be worth the work to swap a motor.
Reply
Old Feb 10, 2015 | 01:51 PM
  #6  
Frank_Ford's Avatar
Ford Owner
 
Joined: Aug 2012
Posts: 1,073
Likes: 138
From: Wichita Kansas
Default

If the truck is in good shape where it looks good, the interior is nice, it drives and handles good on the road and the tires, brakes, front end components, and drive train are in good shape, I would definitely put a good used motor in it. However, if you have a lot of other problems with it, I think you would be a whole lot happier with a new truck. Your choice of a 2004 or 05 is a good one because I would think you can get a good one for less than $10,000. With the good interest rates around right now, you are probably looking at a payment of around $300 per month and you should have a lot of driving left on it after you get it paid off. I bought my 98 back in the spring of 2007 and it is still going strong
Reply
Old Feb 10, 2015 | 02:28 PM
  #7  
Red-Ford's Avatar
5 Year Member
10 Year Member
Liked
Loved
Community Favorite
 
Joined: Jul 2014
Posts: 3,565
Likes: 287
From: Everett, WA
Default

The couple of you that said you found an engine for under 1k, did you install it or have a shop do it? If you had a shop do it, how much did that run you?
Reply
Old Feb 10, 2015 | 05:09 PM
  #8  
99f1504x4.'s Avatar
Thread Starter
Junior Member
 
Joined: Jul 2014
Posts: 178
Likes: 1
From: Houston
Default

Well i have been asking around for 2 weeks in engines and the cheapest i have found one is for $800 and well i will have a shop install it because i do not have the right tools for the job or a engine jack. Frank_ford you are right i can get an 04-05 for under $10,000, so what i did yesterday was call my credit union and ask for a auto loan for $8,000 and i will e putting $2000 down. They said the will call me back today or tomorrow with an answer, so ill see how that goes. As too the condition of the truck i am pretty sure the tranny will give out with the next couple months and it needs all the balljoints and bushing replaced on the front end. i will try to find a picture and post it here thanks guys for your imput keep it coming.....
Reply
Old Feb 10, 2015 | 05:28 PM
  #9  
Krack499's Avatar
Senior Member
iTrader: (1)
 
Joined: Mar 2012
Posts: 14,402
Likes: 131
From: Northeast iowa
Default

Originally Posted by 99f1504x4.
Well i have been asking around for 2 weeks in engines and the cheapest i have found one is for $800 and well i will have a shop install it because i do not have the right tools for the job or a engine jack. Frank_ford you are right i can get an 04-05 for under $10,000, so what i did yesterday was call my credit union and ask for a auto loan for $8,000 and i will e putting $2000 down. They said the will call me back today or tomorrow with an answer, so ill see how that goes. As too the condition of the truck i am pretty sure the tranny will give out with the next couple months and it needs all the balljoints and bushing replaced on the front end. i will try to find a picture and post it here thanks guys for your imput keep it coming.....
If you can manage the extra cash I would try to find a 07 or 08 the earlier years of that style had cam phaser and spark plug issues
Reply
Old Feb 10, 2015 | 05:40 PM
  #10  
99f1504x4.'s Avatar
Thread Starter
Junior Member
 
Joined: Jul 2014
Posts: 178
Likes: 1
From: Houston
Default







Reply



All times are GMT -4. The time now is 02:31 AM.